Table of Contents
Advertisement
Appendix
Troubleshooting
If you are experiencing problems with the drive, verify the following items.
Since the problem may be caused by a device other than the drive, check
other things such as system settings or other software being used, etc.
If you cannot resolve the problem after verifying these items, contact your
dealer or our customer service department.
Problem
Possible Cause
Cannot play a DVD
1. The disc is not inserted
or CD in the drive or
correctly.
certain types of discs
2. The disc is dirty.
cannot be read in the
3. The pick-up lens is dirty.
drive.
4. The disc is scratched or
warped.
5. The disc uses a region
code that cannot be
played on the drive.
Disc tray cannot be
1. AC Plug is not connected
to AC outlet.
opened
Drive is not detected
1. The USB 2.0 converter
by the system.
cable is not properly
connected.
Drive will not play
1. The disc doesn't match
media or certain
your system. Is the media
types of CD or DVD
disc the correct format for
media
the type of system that
you are using.
2. Virus possibility.
Possible Solution
1. Reinsert the disc
correctly.
2. Clean the disc surface.
3. Clean the pick-up lens.
4. Change the disc.
5. Refer to your system
manual for help.
1. Connect the AC plug
tightly.
1.Make sure USB 2.0 converter
cable is connected properly
and re-install the device driver.
1. Check the disc format.
(on a PC an ISO 9660 IBM
compatible PC format as
opposed to Apple/Mac HFS
disc or UNIX disc
formats will not function)
2. Has the Windows DVD-ROM
software driver program
been corrupted by a virus?
Run a Virus Scan program
and repair if possible.
10
Advertisement
Table of Contents
