Settings; Steering Wheel Heater; Steering Wheel Heating - BMW M5 Owner's Manual

Steering wheel heating*

Press the button.
When the steering wheel heater is operating,
the LED in the button lights up.
MDrive
With MDrive you can configure several individ-
ual settings for your vehicle on the Control Dis-
play and activate them with the
steering wheel.
Configuring settings
With the ignition switched on you can set
MDrive on the Control Display.
iDrive, for operating principle refer to page 16.
1.

"Settings"

2. "M Drive"
The functions contained in MDrive are dis-
played:
> "Drivelogic:"
Sequential Manual Transmission with
Online Edition for Part no. 01 41 2 602 697 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 602 697 - © 08/09 BMW AG
>
>
You can reset all settings for MDrive to the
default values:
3. Select the desired function.
4. Press the controller.
5. Turn the controller to select the desired set-
ting.
6. Press the controller.
The setting is stored for the remote control cur-
rently in use.
button on the
Activating settings
Press the
contained in MDrive are active.
Pressing the button again deactivates MDrive.
respond because the ABS Antilock Brake Sys-
tem or DSC Dynamic Stability Control are cur-
rently regulating driving stability. Press the
button again when the indicator lamp no
longer
Even with MDrive activated, you can change
individual settings outside MDrive, e.g. with the
buttons in the center console. To reactivate all
settings made for MDrive on the Control Dis-
play: press the
Drivelogic: shifting modes and Drivel-
ogic driving programs, refer to page
"EDC:"
Programs of the Electronic Damping
Control, refer to page
"DSC:"
Dynamic Stability Control and
M Dynamic Mode, refer to page
button on the steering wheel.
The indicator lamp in the instrument
cluster lights up. The settings made on
the Control Display for the functions
If the indicator lamp flashes after the but-
ton was pressed, MDrive was unable to
flashes.<
button twice.
47
56
75
72