BenQ GH610 User Manual page 59

Problem
Even though the
flash fired, the
image is dark.
The image is
too bright or
too dark.
I cannot format
a memory card.
I cannot
download
images from the
camera to my
computer.
The camera
does not shoot
even when
pressing the
Shutter button.
Downloaded from ManualsCamera.com Manuals
Cause
The distance to the subject
is greater than the flash's
effective range.
The exposure is excessive
or inadequate.
The memory card is write-
protected.
End of the memory card
life.
The free space on the hard
disk of your computer is
insufficient.
There is no power being
supplied to the camera.
The batteries are running
low.
The camera is not in
Capture mode.
The Shutter button was not
pressed all the way down.
The internal memory or
memory card does not have
any free space.
The flash is recharging.
The camera does not
recognize the memory card.
Troubleshooting and service information 59
Solution
Get closer to the subject and
shoot.
Reset exposure compensation.
Remove the write protection.
Insert a new memory card.
Ensure that the hard disk has
enough space for running
Windows and that the drive for
loading image files has free
space equal to or greater than
the memory card in the camera.
Replace the batteries.
Replace the batteries.
Switch to Capture mode.
Press the Shutter button all the
way down.
Load a new card or delete
unwanted files.
Wait until the flash mode icon,
indicated on the screen, stops
flashing.
Format the memory card
before the initial use or before
using with another camera.