Baby Jogger city mini double Assembly Instructions Manual page 4

CaNopy
To attach canopy to frame:
CliCk
1 2
Slide outer canopy peg into Slide middle canopy bracket
the top hole of the universal into canopy bracket located in
mounting bracket until the seat opening in the center
you hear it click into place. of the stroller frame until you
(The bottom hole can be hear it click into place.
used to attach Baby Jogger
accessories to your stroller).
4
Secure the
top of canopy
around
stroller frame
with Velcro
tab.
5
Repeat these
steps with
opposite
canopy.
4
3
At the top and on the side of
the canopy, wrap Velcro strap
around upper frame handle,
fasten snap and attach Velcro
to seat back.
To remove the
canopy:
1
Press gray button
to release the
canopy peg from
the universal
mounting bracket
and unfasten all
Velcro at the top
of the canopy.
brake
engaged
Simply push brake pedal down to engage rear wheel parking brake and lift up to release.
Warning:
Engage parking device before loading
and unloading passenger.
Disengaged
5