4.
On the terminal, check that the parameters 5, 6 and 7 are FLNK, IR and 115K respectively.
When the HA-60IO Bridge Basic Cradle is used, the parameter 5 must be FLINK. See Fig.
2.19.
5.
Select "4: UTILITY" in Fig. 2.20. The screen below will appear. Select "1: TRANS FILE"
menu.
1 : TRANS FILE
2 : FORMAT DRIVE
3 : CHG MEM SIZE
4 : FILEMODE
The download should now take place. When it is done, select "1: EXECUTE AP" in the
System Menu on the terminal. You only have to download the patch file(s) once. You would
need to download them again if you have formatted the Drive A on the terminal. If you want
to download other files (product look up file or font files) then it is simple to create a script or
issue a send command in the LMWIN utility to do so.
Fig. 2.19 Communication via DT-964IOE
Fig. 2.20 Communication via HA-E60IO
NORM
Fig. 2.21
23