Casio DT-930 Series Quick Start Manual page 17

2. Select File setting in Settings (F) menu and specify 'C:\DT930\AP' in Application
storage directory field (see Fig. 2.4). Note that your input in the field will not be accepted if
the directory does not exist on the PC.
3. Select Communication in Settings (F) menu and then select 19200BPS in the COM speed
pull-down menu for the COM speed. Note COM0=COM1 on your PC and COM1=COM2. Set
this to whichever port you use.
4. Select Execute(R) in Fig. 2.6 to make the Multi-drop utility enter to the 'Polling' state.
17
Fig. 2.4
Fig. 2.5
Fig. 2.6