2.9.2 Using LMWIN Method
The upload/download procedure with DT-964IOE Satellite Cradle or HA-E60IO Bridge Basic
Cradle using the LMWIN utility is much flexible. Here are some brief instructions for downloading
a program to the terminal. If your PC does not have the LMWIN utility installed, install it prior to
starting the procedures described below.
Create a script to download patch file
1.
Run the LMWIN utility and continues the rest of steps, 2 to 9.
2.
Select New Script File from Script menu.
3.
Click Browse button.
4.
Navigate to the directory where you have stored the patch files (e.g. c:\dt930\ap) and click
patch001.lod, and then OK button.
5.
Enter 'A:\' in Destination Dir field.
6.
Click Add button. '/s c:\.....\patch001.LOD a:\' appears in Script field.
7.
Repeat the steps 3 to 6 for any other patch files.
8.
Click Save button and then a dialogue box will appear. Enter the file name (e.g.
patch930.scr) in the box.
9.
Click Exit button.
21
Fig. 2.16