Operating Instructions - LG EN 61000-2 Owner's Manual

Operating Instruction
Operating Instruction
How To Insert The Batteries
Remove the battery cover by pulling it according to
the arrow direction.
Insert new batteries making sure that the (+) and (-)
of battery are installed correctly.
Reattach the cover by sliding it back into position.
Use 2 AAA(1.5volt) batteries.
NOTICE
Do not use rechargeable batteries.
Storage And Tips For Using The Remote Controler
• The remote controler may be stored by mounting it on
a wall.
Signal Receptor
Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)
Operation Indication Lamps
On/Off
Sleep mode
Plasma
Timer
Defrost mode
Outdoor unit
OUT
operation
DOOR
Power Display : Indicates the setting temperature and operation mode.
Cooling, heating,
Operation
Dehumidification
mode
Standard
Mode
Shape of Setting
display temperature
* Hot start operation: Stops the indoor fan in heating operation for minutes to prevent cold air from blowing out
from unit.
* In defrost mode unit stops heating operation for few minutes to remove formation of ice on the heat
exchanger coils to maintain the efficiency.
12 Room Air Conditioner
: Lights up during the system operation, error code and auto restart setting.
: Lights up during sleep mode auto operation.
: The function illustrates its dynamic mode by using a multiple lighting system.
: Lights up during timer operation.
: Lights up during defrost mode or *hot start operation (Heat pump model only)
: Lights up during outdoor unit operation. (Cooling model only)
Auto operation mode
Too hot Hot Comfortable
• To operate the room air conditioner, aim the remote
control at the signal receptor.
Jet
Cool/Heat
Cold Too cold
Test Auto
operation clean