Ir Signal Light - Sonos PLAYBAR Product Manual

14
Select Yes or No.
4.
Using the Sonos Controller for Mac or PC
Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
1.
Select Room Settings if it is not already highlighted on the left.
2.
Choose the room the PLAYBAR is located in from the Room Settings for drop-down.
3.
Select the TV Setup tab.
4.
Check the Ungroup on Autoplay checkbox to turn this setting on, uncheck to turn it off.
5.
Close the Settings window when changes are complete.
6.

IR signal light

A light displays on the PLAYBAR when an IR signal is being sent. If desired, you can adjust this setting so the IR light never
displays. This setting is On by default.
Using a handheld Sonos controller
From the Settings menu, select Room Settings.
1.
Select the room the PLAYBAR is located in.
2.
Select TV Setup and Control -> IR Signal Light.
3.
Select On or Off.
4.
Using the Sonos Controller for Mac or PC
Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
1.
Select Room Settings if it is not already highlighted on the left.
2.
Choose the room the PLAYBAR is located in from the Room Settings for drop-down.
3.
Select the TV Setup tab.
4.
Check the IR Signal Light checkbox to turn this setting on, uncheck to turn it off.
5.
Close the Settings window when changes are complete.
6.
IR repeater
When the PLAYBAR is placed in front of your TV on a tabletop, it may block the IR sensor on your TV. The IR repeater setting
allows the PLAYBAR to repeat the signal to your TV. This setting is On by default.
Using a handheld Sonos controller
From the Settings menu, select Room Settings.
1.
Select the room the PLAYBAR is located in.
2.
Select TV Setup and Control -> IR Repeater.
3.
Select On or Off.
4.
Product Guide