Panasonic KX-TG6451BX Operating Instructions Manual page 30

TG6451BX(e).book Page 30 Wednesday, July 8, 2009 10:25 AM
Intercom/Locator
Y Handset
1
During an outside call, press 4 to put the
call on hold.
L k flashes to indicate the outside call is on
hold.
2
To page the base unit, press {0}.
3
Wait for the paged party to answer.
L If the paged party does not answer, press
4 to return to the outside call.
4
Proceed with the desired operation.
■ To transfer the call:
Press {ih}.
L The outside call is routed to the
destination unit.
■ To establish a conference call:
Press {3}.
L To leave the conference, press {ih}.
The other parties can continue the
conversation.
Transferring a call without speaking to the
handset or base unit user
= Base unit
1
During an outside call, press {x}.
L k flashes to indicate the outside call is on
hold.
2
Place the corded handset on the cradle.
L The outside call rings at the other unit.
Y Handset
1
During an outside call, press 4 to put the
call on hold.
L k flashes to indicate the outside call is on
hold.
2
To page the base unit, press {0}.
3
{ih}
L The outside call rings at the other unit.
Note for base unit and handset:
L If the other user does not answer the call within
1 minute, the call rings at your unit again.
30
Answering a transferred call
= Base unit
Lift the corded handset or press {s} to answer the
page.
Y Handset
Press {C} to answer the page.
Note for base unit and handset:
L After the paging party disconnects, you can talk
to the outside caller.