Log; Call Waiting; Call Timers; Packet Data - Nokia N95 User Manual

Call waiting

You can answer a call while you have another call in
progress if you have activated
Settings > Phone > Call >
To answer the waiting call, press . The first call is put on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select
Transfer. To end the active call, press . To end both calls,
select Options > End all calls.

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press , and select
Recent calls. The device registers missed and received calls
only if the network supports these functions, the device is
switched on, and within the network service area.
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
logs, open the log you want to erase, and select
Clear list. To clear an individual event, open a log, scroll to
the event, and press .
Call waiting in Tools >
Call waiting (network service).
Options >
Tools > Log >
Options > Clear recent
Options

Call timers

To monitor the approximate duration of your incoming and
outgoing calls, press
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code. See "Phone and
SIM card," p. 115.

Packet data

To check the amount of data sent and received during packet
data connections, press
data. For example, you may be charged for your packet data
connections by the amount of data sent and received.

Monitor all communication events

Icons in Log are as follows:
Incoming
Outgoing
>
Missed communication events
To monitor all voice calls, text messages, or data and wireless
LAN connections registered by the device, press
Tools > Log, and press
, and select Tools > Log > Call
Options > Clear
, and select Tools > Log >
to open the general log.
timers.
Packet
, select
99