Connecting Your Tv; Playing Your Ipod/Iphone - Pioneer X-SMC1-K Operating Instructions Manual

04 iPod/iPhone playback
3 Connect your iPod/iPhone.
• When your iPod/iPhone is not connected to the unit,
close the iPod/iPhone connector port firmly.
Push

Connecting your TV

To watch iPod/iPhone images on a television, connect it using
the included video cable. For details, see Connecting using a
video cable on page 7.
• When an iPod/iPhone is connected to the unit, the TV
output setting of the iPod/iPhone is automatically set to
2
ON.
Caution
• Before making or changing the connections, switch off
the power and disconnect the power cord from the
power outlet. Plugging in should be the final step.
Note
1 For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone.
•
2 Some iPods allow the TV output setting to be changed while connected.
•
When the iPod/iPhone is disconnected from this unit, the iPod/iPhone's TV output setting returns to its original state.
3 For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone.
16
En
3
2
1

Playing your iPod/iPhone

Caution
• When your iPod/iPhone is connected to this unit and you
wish to operate the iPod/iPhone directly, be sure to
steady the iPod/iPhone with the other hand to prevent
malfunctions due to faulty contacts.
1 Connect your iPod/iPhone.
• If an iPod/iPhone is connected when this unit is on,
playback of the iPod/iPhone will not begin.
Press FUNCTION / to select iPod as the
2
input source.
is shown on the front panel display.
Press  PLAY.
3
• The available iPod/iPhone's playback control by this unit
is , , , , , , .
• In the following case, operate your iPod/iPhone directly
- Searching a file by artist name or genre.
- Playing in the repeat or shuffle mode.
- Watching images stored in iPod/iPhone on your
television.
Important
If this unit can not play the iPod/iPhone when Err is displayed,
perform the following troubleshooting checks:
• Check whether the iPod/iPhone is supported by this unit.
• Reconnect the iPod/iPhone to the unit. If this doesn't
seem to work, try resetting your iPod/iPhone.
If the iPod/iPhone cannot be operated, check the following
items:
• Is the iPod/iPhone connected correctly? Reconnect the
iPod/iPhone to the unit.
• Is the iPod/iPhone experiencing a hangup? Try resetting
the iPod/iPhone, and reconnect it to the unit.
Tip
• iPod/iPhone recharging occurs whenever an iPod/
iPhone is connected to this unit. (This function is
supported in standby mode as well.)
• When input is switched from iPod to another function,
iPod/iPhone playback is temporarily stopped.
3
: