Defy 501 Owner's Manual
Defy 501 solid plate plug in stove ; 520 spiral plate stove ; 521 solid plate stove
Hide thumbs
Also See for 501:
- Product catalog (20 pages) ,
- Owner's manual (12 pages) ,
- Owner's manual (13 pages)
Related Manuals for Defy 501
Summary of Contents for Defy 501
- Page 1 OWNER’S MANUAL MODEL 501 MODEL 520 MODEL 521 SOLID PLATE SPIRAL PLATE SOLID PLATE PLUG IN STOVE STOVE STOVE Available in Available in Available in White & Black White only White & Black PART NUMBER 068 359 www.defy.co.za PAGE 1 OF 12...
- Page 2 Introduction Electrical installation Congratulations on the purchase of this This appliance must be earthed and quality appliance. We trust that you will the manufacturer and the seller do enjoy many years of trouble free use. not accept responsibility for any damage due to incorrect installation Please read...
- Page 3 Anti-tilt mechanism Method 1 All stoves can tilt if you or a child sit or lean on an open oven door. Safety regulations stipulate that the ANTI-TILT mechanism supplied with the stove, must be fitted as shown in methods 1 or method 2, depending on the mechanism supplied with your particular model.
- Page 4 Anti-tilt mechanism Method 1 Stove Parts Anti-tilt installation side view Stove Assembly Anti-tilt installation top view The manufacturer strives for continuous improvement. For this reason, technical specifications, text and illustrations in this manual are subject to change without notice. Figures in this manual are schematic and may not match your appliance exactly. Safety regulations stipulate that the ANTI-TILT mechanism supplied with the stove, must be fitted as shown in methods 1 or method 2.
- Page 5 Anti-Tilt mechanism Method 2 “A” 1 x Stability chain • “B” 1 x Stability hook with anchor sleeve • “A” is factory fitted at the rear of the stove in the centre. • Position the stove and move “A” to touch the wall behind the stove. •...
- Page 6 Oven door (Only applies to models with removable oven door) The oven door may be removed to improve access to the oven for cleaning purposes. 1. Open the door fully to expose the hinges (A) on either side. 2. Flip the hinge locking levers (B) to the upright position. 3.
- Page 7 (501 Model Only) best baking results, aluminium bake tray (300 x 230 x 30mm.) These are available from all Defy Parts Centres Part number 067609. Teflon coated baking trays are not recommended. Set the selector to - Bake and 2 small •...
- Page 8 For best baking results, use an aluminium THE CONTROL PANEL bake tray (300x230x30mm). These are OVEN INDICATOR LIGHT PLATE INDICATOR LIGHTS available from all Defy Parts Centres Part number 067609. Teflon coated baking trays are not recommended. Set the selector to pre-heat and set the •...
- Page 9 Do not use metal sewing machine oil or electrical hotplate scouring pads or abrasive cleaners. polish - available from Defy Service Element and guard Centres. Extra attention is required in After cleaning the oven, ensure that the •...
- Page 10 Safety advice Do not place baking trays, dishes or • aluminium foil directly onto the bottom of This section contains safety instructions that the oven. The heat accumulation might will help you avoid risk of injury and damage the bottom of the oven. damage.
- Page 11 Polokwane.Service@defy.co.za CENTRE If you have followed the instructions and still have a problem, contact the nearest Defy Service Centre. They will be able to advise you on any aspect of the product or send a qualified technician to repair it.
- Page 12 Warranty This certificate is issued by DEFY APPLIANCES (PTY) LIMITED manufacturers of Defy and Ocean products, hereinafter the Company, to the original purchaser only, of the appliance described on the certificate and shall constitute the only warranty given in respect of this appliance.