Function Menu; Transpose; Tune - Medeli MD500 Instruction Manual

Function Menu

Option LCD Display

TRANSPOSE

XXX Transpos

TUNE

XXX Tune
OCTAVE XXX Octave
BEAT XXX Beat
SPLIT POINT XXX Split P t
PEDAL ASSIGN 00X Ped
TOUCH
XXX Touch
BRILLIANCE
XXX Brillian
REVERB TYPE
00X Rev Type
REVERB LEVEL XXX Rev Lev
CHORUS TYPE 00X CHo Type
CHORUS LEVEL XXX Cho Lev
MIDI RECEIVE
XXX Receive
MIDI TRANSMIT XXX Transmit
+ / YES
- /NO
Range Default
-12 12 0
-50 50 0
-2 (4 Octave 0
0,2 4
61(C2... C7) 19(#F3)
Sust Soft St/S Mem Sust
1-3,off 2
0 -127 96
0 -7 4
0 -127 60
0 -7 0
0 127 0
01 16 ALL
ALL
01 16 01
Press [FUNCTION+/NEXT]
[FUNCTION-/BACK] button to enter or
escape the menu of function. The default
option of the menu is
Press [FUNCTION+/NEXT] or
[FUNCTION-/BACK] button, select your
desired option. Use [+/YES]/[-/NO] or
the DIAL to set the parameter.
The option and the parameters are as
follows:
Note:
If you do not press any button for 5
seconds after entering FUNCTION menu,
it will quit this menu automatically.
Transpose
You can change the key of the entire
keyboard with TRANSPOSE function by
adjusting the pitch in semitone steps.
The LCD displays the transpose value.
Use [+/YES]/[-/NO] or DIAL to change the
transpose value. Its range is from
12 semitones.
Press [+/YES] and [-/NO] together will set
the TRANSPOSE value to its default one.
Tune
The LCD displays the tune value. Use
[+/YES]/[-/NO] or DIAL to change the tune
value. Its range is from
only by the right area of keyboard.
Press [+/YES] and [-/NO] together will
set the TUNE value to its default one.
15
or
TRANSPOSE .
12 to
50 to 50 cents