Connecting And Operating - Pro 2 HDMIC6PRO User Manual

CONNECTING AND OPERATING

How to Connect the HDMIC6PRO HDBaseT Extender
1. Connect one HDMI Cable between the HDMI output port of source
device and the HDMI input port of Transmitter unit (5 Meters Max)
2. Connect one HDMI Cable between the HDMI input port of display
device and the HDMI output port of Receiver unit. (5 Meters Max)
3. Connect one 100 Ohm Cat.6 cable between the RJ45 port of
Transmitter unit and RJ45 port of Receiver unit. Note: CAT.6 is to be
no longer than 100 meters in length and should not run parallel to
mains power cables.
4. Connect 5V DC power supplies to both Transmitter and Receiver
unit.
5. Power on the display device first and then the source device.
With Bi direction IR 100M