Advertisement

GB
User manual of ZWG1 controller
Contents
1.Description..........................................................................................................................................................2
2.Installation of ZWG1 controller..........................................................................................................................3
3.Controller programming .....................................................................................................................................4
3.1.Adding device to network (INCLUDE function)........................................................................................5
3.3.Associating another controller with the network (LEARN MODE)...........................................................7
3.4.Deleting device from a pair of controller buttons (DELETE function) ......................................................8
3.5.Excluding device from the network (EXCLUDE function)........................................................................9
3.6.Restoring default settings in the controller (DEFAULT function)............................................................10
3.7.Removing SECONDARY controller from the network............................................................................10
4.Technical parameters.........................................................................................................................................10
5.Battery replacement...........................................................................................................................................11
6.WARRANTY....................................................................................................................................................12
11.11.15 NC818
1/16
©2012, FAKRO

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZWG1 and is the answer not in the manual?

Questions and answers

Summary of Contents for fakro ZWG1

  • Page 1: Table Of Contents

    User manual of ZWG1 controller Contents 1.Description................................2 2.Installation of ZWG1 controller..........................3 3.Controller programming .............................4 3.1.Adding device to network (INCLUDE function)..................5 3.2.Associating device with a pair of buttons on the controller (ASSOCIATE function)........6 3.3.Associating another controller with the network (LEARN MODE)............7 3.4.Deleting device from a pair of controller buttons (DELETE function) ............8...
  • Page 2: Description

    The ZWG1 (wall keyboard) enables remote control of electronic accessories compatible with the “Z-Wave” system, e.g. ZWS12 or ZWS30 motors for operating FAKRO roof windows. The ZWG1 controller operates individually 1 or more devices simultaneously. It is possible to control up to 231 devices (all devices will work at the same time).
  • Page 3: Installation Of Zwg1 Controller

    2. Installation of ZWG1 controller The ZWG1 controller should be attached to the wall or other permanent building element by means of four screws driven into cylindrical plugs placed in the openings drilled earlier in the wall. Mounting bracket is also designed for mounting in a standard electric can.
  • Page 4: Controller Programming

    3. Controller programming In order to operate FAKRO electronic accessories, featuring Z-Wave system, by means of the ZWG1 controller, it is necessary to: 1. Add the device to the “Z-Wave” network (INCLUDE function) – see section 3.1 2. Associate the device with a selected pair of buttons on the controller with which user wishes to operate the device (ASSOCIATE function) –...
  • Page 5: Adding Device To Network (Include Function)

    • the device already belonging to other network. It is necessary to use EXCLUDE function and repeat the • procedure of device adding to the network. 11.11.15 NC818 5/16 ©2012, FAKRO...
  • Page 6: Associating Device With A Pair Of Buttons On The Controller (Associate Function)

    • device already belongs to another network or it has not been associated with any network. It is necessary • to perform EXCLUDE function on the device and repeat INCLUDE and ASSOCIATE functions. 11.11.15 NC818 6/16 ©2012, FAKRO...
  • Page 7: Associating Another Controller With The Network (Learn Mode)

    • controller already belonging to another network. It is necessary to perform DEFAULT procedure with it and • repeat associating with the network. 11.11.15 NC818 7/16 ©2012, FAKRO...
  • Page 8: Deleting Device From A Pair Of Controller Buttons (Delete Function)

    *) Programming error can be caused by: failure to press the programming button within 10 seconds from the controller signaling its readiness for • deleting the device from selected pair of buttons; long distance between the controller and device. • 11.11.15 NC818 8/16 ©2012, FAKRO...
  • Page 9: Excluding Device From The Network (Exclude Function)

    Note !!! Moving the device within the network (e.g. socket module) it is recommended to delete it from the controller memory (delete it from the pair of buttons first (section 3.4) and then remove from the network (section 3.5) and then add it again after installation in new place of work. 11.11.15 NC818 9/16 ©2012, FAKRO...
  • Page 10: Restoring Default Settings In The Controller (Default Function)

    Removing this controller from the network consists in restoring default settings with the use of DEFAULT function. 4. Technical parameters Technical parameters Power supply CR2450, 3V DC Working temperature C) to (40 Working range Up to 40 [m] Working frequency 868,42 MHz 11.11.15 NC818 10/16 ©2012, FAKRO...
  • Page 11: Battery Replacement

    Multiple device programming shortens the battery life. 1. Remove the back section of the casing 2. Replace the battery with a new one 3. Reinstall the back section of the casing and screw it down in. 11.11.15 NC818 11/16 ©2012, FAKRO...
  • Page 12: Warranty

    In case of failure, the device must be submitted for repair with a Warranty Card. Defects revealed within the warranty period will be removed free of charge no longer than 14 days after accepting the product for repair. Warranty and post-warranty repairs are performed by the manufacturer i.e. FAKRO PP. Sp. z o.o. Quality Certificate: Device Model............................
  • Page 13 11.11.15 NC818 13/16 ©2012, FAKRO...
  • Page 14 11.11.15 NC818 14/16 ©2012, FAKRO...
  • Page 15 11.11.15 NC818 15/16 ©2012, FAKRO...
  • Page 16 FAKRO PP Sp. z o.o. ul. Węgierska 144A 33-300 Nowy Sącz Polska www.fakro.com tel. +48 18 444 0 444 fax. +48 18 444 0 333 11.11.15 NC818 16/16 ©2012, FAKRO...

Table of Contents