Table of Contents
Advertisement
VENTED DECORATIVE NATURAL GAS LOGS
OWNER'S OPERATION AND INSTALLATION MANUAL
HDVSR18, HDVDR18W, HDVDR24W AND HDVTR24W
WARNING: If the information in these instructions
is not followed exactly, a fire or explosion may result
causing property damage, personal injury or death.
— Do not store or use gasoline or any other flammable
vapors or liquids in the vicinity of this or any other
appliance.
— WHAT TO DO IF YOU SMELL GAS :
• Do not try to light any appliance.
• Do not touch any electrical switch;
• Do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's
phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
— Installation and service must be performed by a quali-
fied installer, service agency or the gas supplier.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
LOG SET AND BURNER MODELS
FOR YOUR SAFETY
For more information, visit www.desatech.com
RGA 2-72
APPROVED
Advertisement
Table of Contents
Related Manuals for Desa HDVSR78
Summary of Contents for Desa HDVSR78
- Page 1 VENTED DECORATIVE NATURAL GAS LOGS OWNER’S OPERATION AND INSTALLATION MANUAL RGA 2-72 APPROVED LOG SET AND BURNER MODELS HDVSR18, HDVDR18W, HDVDR24W AND HDVTR24W WARNING: If the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. FOR YOUR SAFETY — Do not store or use gasoline or any other flammable vapors or liquids in the vicinity of this or any other appliance.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Safety ..............2 Troubleshooting ..........12 Local Codes............4 Parts ..............14 Unpacking............4 Service Hints ............. 18 Product Identification ........... 4 Technical Service..........18 Optional Product Features........4 Replacement Parts ..........18 Installation ............5 Accessories ............19 Operation ............11 Warranty ..........Back Cover Cleaning and Maintenance .........11... - Page 3 SAFETy Continued 8. Do not allow fans to blow directly into the fireplace. Avoid any drafts that alter burner WARNING: Any change to flame patterns. Ceiling fans can create this fireplace or its controls can drafts that alter burner flame patterns. be dangerous. Altered burner patterns can increase sooting.
-
Page 4: Local Codes
National Fire Protection Association, Inc. to logs and base for shipment. Batterymarch Park Quincy, MA 02269 3. Check heater for any shipping damage. If heater is damaged call DESA Heating, LLC at 1-866-672-6040 for replacement parts before returning to dealer. PRODUCT IDENTIFICATION Grate... -
Page 5: Installation
INSTALLATION FLUE OPENING SPECIFICATIONS CAUTION: Do not remove the Note: This vented appliance must be installed data plates attached to the burner only in a solid-fuel burning fireplace with a pan. The data plates contain im- working flue and constructed of noncombus- portant warranty information. tible material. The charts in Figure 2 indicate technical information regarding the installation of your WARNING: Before installing gas log set. - Page 6 INSTALLATION Continued VENTING SPECIFICATIONS FOR CONNECTING TO GAS SUPPLY INSTALLATION WARNING: A qualified ser- The fireplace chimney flue and vent must be vice person must connect log drafting properly. To check the vent for proper set to gas supply. Follow all drafting: Light a tightly rolled newspaper on one end and place it at the inside front edge local codes.
- Page 7 INSTALLATION Continued We recommend that you install a sediment PRESSURE TESTING GAS SUPPLY trap in supply line as shown in Figure 4. PIPING SYSTEM Locate sediment trap where it is within reach Test Pressures In Excess Of 1/2 PSIG for cleaning. Install in piping system between (3.5 kPa) fuel supply and heater.
- Page 8 INSTALLATION Continued HEARTH kIT ASSEMBLY AND 4. Place burner manifold in pan with thread- ed opening facing open knockout plug. INSTALLATION 5. Using thread sealant (resistant to the ac- Kit Assembly - Dual-Flame Only tion of propane/LP gas) on larger end of 1. Determine which side gas line will be fitting, screw burner inlet fitting through coming into fireplace.
- Page 9 INSTALLATION Continued OPTIONAL GA9050A ON/OFF SAFETy 2. Open glowing embers and evenly cover ash bed material (vermiculite) in burner VALVE/PILOT kIT pan. For additional convenience and safety, or for propane/LP conversion, an optional ON/OFF INSTALLING GRATE AND LOGS safety valve/pilot kit is available. See Acces- 1.
- Page 10 INSTALLATION Continued 4. Place front log(s) on grate and slide space between logs as possible to forward against front bars on grate (see minimize flame impingement and sooting. Figure 9, page 9). Note: Logs may chip if they are handled roughly or if hit together while being 5.
-
Page 11: Operation
OPERATION 4. Light a match and lay it on top of the pan FOR YOUR SAFETY material about 2" from the end of the sup- READ BEFORE LIGHTING ply side of the pan WARNING: Keep flue open 5. Slowly turn the gas shutoff valve ON until the burner ignites. -
Page 12: Troubleshooting
TROUBLESHOOTING WARNING: Turn off log set and let cool before servicing. Only a qualified service person should service and repair log set. Note: All troubleshooting items are listed in order of operation. OBSERVED PROBLEM POSSIBLE CAUSE REMEDY Log set is smoking/sooting 1. Poor fuel quality 1. Contact local natural or excessively propane/LP gas company (Note: It is natural and unavoid- 2. - Page 13 TROUBLESHOOTING Continued WARNING: If you smell gas • Shut off gas supply. • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Immediately call your gas supplier from a neighbor’s phone. Fol- low the gas supplier’s instructions. • If you cannot reach your gas supplier, call the fire department. IMPORTANT: Operating log set where impurities in air exist may create odors. Cleaning sup- plies, paint, paint remover, cigarette smoke, cements and glues, new carpet or textiles, etc., create fumes.
-
Page 14: Parts
PARTS MODELS HDvSR18, HDvDR18W AND HDvDR24W American Chestnut Crimson Creek www.desatech.com 117272-01F... - Page 15 PARTS This list contains replaceable parts used in your log set. When ordering parts, follow the instructions listed under Replacement Parts on page 18 of this manual. NO. PART NO. DESCRIPTION 901056-01 Brass 3/8 FLR x 1/2 FPT Adapter • •...
- Page 16 PARTS MODEL HDVTR24W Kingston Oak www.desatech.com 117272-01F...
- Page 17 PARTS MODEL HDVTR24W This list contains replaceable parts used in your log set. When ordering parts, follow the instructions listed under Replacement Parts on page 18 of this manual. NO. PART NO. DESCRIPTION 901056-01 Brass 3/8 FLR x 1/2 FPT Adapter 901059-01 Brass 3/8 FLR x 12 FPT Adapter 901066-01 Brass Air Mixer-Natural Gas 901064-04 Natural Gas Injector...
-
Page 18: Service Hints
• heater will not produce specified heat serial numbers of your heater ready. • propane/LP gas supply may be low You can also visit DESA Heating, LLC’s web You may feel your gas pressure is too low. If site at www.desatech.com. -
Page 19: Accessories
Purchase these accessories from your local dealer. If they can not supply these accessories For decorative purposes only. Not to be used call DESA Heating, LLC at 1-866-672-6040 for as additional logs on unit. information. You can also write to the address INDIvIDUAL SPLIT LOG - GA9550A listed on the back page of this manual. -
Page 20: Warranty
This is DESA Heating, LLC’s exclusive warranty, and to the full extent allowed by law; this express warranty excludes any and all other warranties, express or implied, written or verbal and limits the duration of any and all implied warranties, including warranties of merchantability and fitness for a particular purpose to one (1) year on new products and 30 days on factory reconditioned products from the date of first purchase.