Page 1
10/100/1000 Base-TX Ethernet PCI-X Adapter Installation and Using Guide REFERENCE 86 A1 17EG 00...
Page 3
ESCALA 10/100/1000 Base-TX Ethernet PCI-X Adapter Installation and Using Guide Hardware November 2002 BULL CEDOC 357 AVENUE PATTON B.P.20845 49008 ANGERS CEDEX 01 FRANCE REFERENCE 86 A1 17EG 00...
Page 4
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries The information in this document is subject to change without notice. Bull will not be liable for errors contained herein, or for incidental or consequential damages in connection with the use of this material.
Contents Safety Information. Handling Static-Sensitive Devices . . vii About This Book . . ix ISO 9000 . . ix Related Publications . . ix Trademarks . . ix Chapter 1. Overview . Chapter 2. Preparing for Installation . Verifying Your Hardware Requirements . Verifying Your Software Requirements Checking Prerequisites Chapter 3.
Page 6
10/100/1000 Base-TX Ethernet PCI-X Adapter Installation and Using Guide...
Safety Information DANGER An electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the system or the devices that attach to the system. It is the responsibility of the customer to ensure that the outlet is correctly wired and grounded to prevent an electrical shock.
Page 8
10/100/1000 Base-TX Ethernet PCI-X Adapter Installation and Using Guide...
Handling Static-Sensitive Devices Attention: Static electricity can damage this device and your system unit. To avoid damage, keep this device in its anti-static protective bag until you are ready to install it. To reduce the possibility of electrostatic discharge, follow the precautions listed below: v Limit your movement.
Page 10
viii 10/100/1000 Base-TX Ethernet PCI-X Adapter Installation and Using Guide...
About This Book This book provides information about the 10/100/1000 Base-TX Ethernet PCI-X Adapter, as well as how to attach the adapter to a network. Use this book together with your specific system unit and operating system documentation. ISO 9000 ISO 9000 registered quality systems were used in the development and manufacturing of this product.
Page 12
10/100/1000 Base-TX Ethernet PCI-X Adapter Installation and Using Guide...
Chapter 1. Overview The 10/100/1000 Base-TX Ethernet PCI-X Adapter is a high performance, highly integrated, universal Ethernet LAN adapter for PCI-X and PCI systems. The adapter provides 10/100/1000 Mbps connectivity over 4 pairs of standard CAT-5 cable up to 100 meters.
Page 14
ACT / LNK 10=OFF 100=GRN 1000=ORG Figure 1. 10/100/1000 Base-TX Ethernet PCI-X Adapter ACT/LNK LED RJ-45 Connector Link Speed LED 10/100/1000 Base-TX Ethernet PCI-X Adapter Installation and Using Guide...
Chapter 2. Preparing for Installation This chapter helps you prepare to install your 10/100/1000 Base-TX Ethernet PCI-X Adapter. Note: If AIX is not installed on your system unit, install your adapter before you install the operating system (see Chapter 4, “Installing the 10/100/1000 Base-TX Ethernet PCI-X Adapter”...
Page 16
Note: Be sure to retain your proof of purchase as it might be required to receive warranty service. 10/100/1000 Base-TX Ethernet PCI-X Adapter Installation and Using Guide...
Chapter 3. Installing the Device Driver Software This chapter explains how to install device driver software. The device driver is provided for the AIX operating system. Be sure you have read Chapter 2, “Preparing for Installation” on page 3 to determine: v If you should install your device driver software first, go to step 1 and continue with this section.
10. Press Enter. The system finds and highlights this device driver software. 11. Press F7 to select the highlighted device driver software. 12. Press Enter. 13. The INSTALL ADDITIONAL DEVICE SOFTWARE screen displays. The entry fields are automatically updated. Press Enter to accept the information. 14.
Page 19
Device Driver Software” on page 5. Return to “Verifying Adapter Hardware Installation” on page 10 and continue with step 1 again. If you continue to experience problems, it may be necessary to call your system support organization. Refer to your operating system documentation for instructions.
Page 20
10/100/1000 Base-TX Ethernet PCI-X Adapter Installation and Using Guide...
Chapter 4. Installing the 10/100/1000 Base-TX Ethernet PCI-X Adapter This chapter explains how to install the 10/100/1000 Base-TX Ethernet PCI-X Adapter. Before you begin, be sure you have read “Handling Static-Sensitive Devices” on page vii. Note: Do not remove the 10/100/1000 Base-TX Ethernet PCI-X Adapter from its anti-static package at this time.
Verifying Adapter Hardware Installation To verify that your system unit recognizes the PCI adapter, do the following: 1. If necessary, log in as root user. 2. At the command line, type: lsdev -Cs pci 3. Press Enter. A list of PCI devices displays. If the 10/100/1000 Base-TX Ethernet PCI-X Adapter did install correctly, an Available status indicates that the adapter is installed and ready to use.
Chapter 5. Connecting to an Ethernet Network This chapter explains how to connect the adapter to the UTP network. Refer to your local procedures for information about connecting the 10/100/1000 Base-TX Ethernet PCI-X Adapter to your Ethernet network. Note: Only one type of network can be attached to the adapter card at one time. Connecting the Network Cables and Adapter Before you begin connecting the adapter, make sure you have the hardware listed in “Verifying Your Hardware Requirements”...
Understanding the Adapter LEDs The LEDs on the 10/100/1000 Base-TX Ethernet PCI-X Adapter provide information about the card’s operation status. The LEDs are visible through the card’s mounting bracket and, when lit, indicate the following conditions: Light Description Link Speed 10 Mbps Green 100 Mbps...
Appendix A. Communications Statements The following statement applies to this product. The statement for other products intended for use with this product appears in their accompanying documentation. Federal Communications Commission (FCC) Statement Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
International Electrotechnical Commission (IEC) Statement This product has been designed and built to comply with IEC Standard 950. United Kingdom Telecommunications Safety Requirements This equipment is manufactured to the International Safety Standard EN60950 and as such is approved in the UK under the General Approval Number NS/G/1234/J/100003 for indirect connection to the public telecommunication network.
Electromagnetic Interference (EMI) Statement - Taiwan The following is a summary of the EMI Taiwan statement above. Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user will be required to take adequate measures. Radio Protection for Germany Dieses Gerät ist berechtigt in Übereinstimmung mit Dem deutschen EMVG vom 9.Nov.92 das EG–Konformitätszeichen zu führen.
Page 28
10/100/1000 Base-TX Ethernet PCI-X Adapter Installation and Using Guide...
Appendix B. Notices This information was developed for products and services offered in the U.S.A. The manufacturer may not offer the products, services, or features discussed in this document in other countries. Consult the manufacturer’s representative for information on the products and services currently available in your area. Any reference to the manufacturer’s product, program, or service is not intended to state or imply that only that product, program, or service may be used.
Page 30
10/100/1000 Base-TX Ethernet PCI-X Adapter Installation and Using Guide...
Page 31
If you require a written reply, please include your complete mailing address below. NAME : Date : COMPANY : ADDRESS : Please give this technical publication remarks form to your BULL representative or mail to: ept. Bull - Documentation D 1 Rue de Provence BP 208...
Page 32
: The latest revision will be provided if no revision number is given. [ _ _ ] NAME: Date: COMPANY: ADDRESS: PHONE: FAX: E-MAIL: For Bull Subsidiaries: Identification: For Bull Affiliated Customers: Customer Code: For Bull Internal Customers: Budgetary Section: For Others: Please ask your Bull representative.