Windows - Archos 400 User Manual

Windows

®
To safely disconnect the Gmini 400 hard disk, click on the system tray
remove icon (green arrow as shown below) and follow the instructions.
Wait until you get a message saying that you can safely unplug the device
before disconnecting the USB cable. Attention: The operating system will
not allow you to safely disconnect the Multimedia Gmini 400 if you have
an open fi le from it in a running application. You will have to close all open
Gmini 400 fi les in any running application. Sometimes, even when fi les are
closed in an application, you will have to shut down the application. Using
the green disconnect arrow in the system tray will then allow you to safely
disconnect the Gmini 400.
1. The safe remove icon is in the system tray next to the clock.
Windows XP
®
2. Click on the icon to eject (unmount) the Gmini 400 from the computer and
select the 'Safely remove' message.
Windows XP & 2000
®
3. There will be a message indicating that it is now safe to disconnect the Gmini
400. You can now go ahead and unplug the USB cable from the Gmini 400.
Windows XP
®
Note: Hitachi_DK23DA-20 only indicates the type of hard disk used inside of the Gmini 400.
Windows 2000 & Windows
®
ME
®
Windows 2000
®
47