Maintenance; Repair & Disposal - IKAWA V2-PRO Manual

7 MAINTENANCE

BEFORE ATTEMPTING ANY
MAINTENANCE ENSURE THAT THE
MACHINE UNPLUGGED FROM ANY
POWER SOURCE, AND THAT THE
MACHINE IS AT ROOM TEMPERATURE.
Periodically check the air inlet at the bottom and remove
any debris that may have accumulated.
The jar can be washed with warm, soapy water but only
when the cork grip is removed. The cork should not get wet.
The jar cannot go in the dishwasher or microwave.
To clean the glass lid, first remove the doser. Second,
remove the glass lid by pulling upwards on each side (the lid
is attached magnetically). You can wash the glass lid
including the metal vent with warm, soapy water. The lid
cannot go in the dishwasher or microwave.
We do not recommend cleaning the inside the Roasting
Chamber or cyclone as this risks breaking the temperature
sensor tip and or water entering the roaster.
8 REPAIR & DISPOSAL
WARNING:
DO NOT REPAIR THE IKAWA SYSTEM
YOURSELF. BY DOING SO YOU
INVALIDATE ANY WARRANTY, AND
RISK GETTING INJURED.
If your system is not working correctly, refer to Chapter 6
(Troubleshooting).
If your IKAWA system is no longer working and not under
warranty, we recommend replacing your machine with a
new IKAWA Roaster.
DISPOSAL:
Waste and electrical products should not be disposed of
with household waste. Please contact our technical team for
recycling/disposal advice as regional variations apply
WARNING:
ENSURE THAT NO LIQUID PENETRATES
THE HOLES IN THE BOTTOM OF THE
ROASTING CHAMBER.
17