Side Broom System - R.P.S. Corporation MAGNUM series Operator's Manual

1. Your machine may come equipped
with the "optional" side broom system.
(SEE BELOW)
2. Flip side broom switch up to engage broom.
(yellow toggle on left side of the control panel.)
(SEE MACHINE CONTROLS ON PAGE 7.)
3. To adjust side broom height turn
adjustment screws
"A"
counter-clockwise to lower the brooms.
(SEE BELOW)
A
4. To move side broom system out of the
way when not in use just pull the pin
on each side of deck and rotate side
broom system to the up position and
reinsert pin. (SEE BELOW)
B

SIDE BROOM SYSTEM

clock-wise to raise,
A
"B"
PAGE 13
5. Brooms adjusted to low. (SEE BELOW)
6. Brooms adjusted to high. (SEE BELOW)
7. Brooms adjusted just right. (SEE BELOW)