Installation; Mounting The Aircraft Panel Connector - Bose A20 Owner's Manual

Mounting the aircraft panel connector

The aircraft panel connector is part of the optional 6-pin wiring harness assembly.
Visit www.Bose.com or www.Global.Bose.com for information or purchase.
WARNING: The aircraft panel connector must be mounted by a technician who is
qualified to perform this type of avionics installation for the aircraft you are using.
Mount the connector into a cutout, using the diagrams below as a guide.
12.5mm
.49"
Connect the eight wires as follows:
• Two for the microphone
• Two for audio
• One for power
• One for ground
• Two for audio shields
Audio and microphone wires should be connected to the back of the existing
microphone and headphone jacks, leaving existing jacks intact for use with con-
ventional headsets. This is usually the fastest installation method.
Receptacle - Pinout (front view)
Pin 6
14.0mm
.55"
Pin 1
Aircraft Interface Schematic
RED
• 1 V+IN
BLK
• 2 GND
BLK/WH
WHT
• 3 COMM L
BLU
• 4 COMM R
WHT
• 5 MIC HI
WH/BLU
• 6 MIC LO
BLK/WH

Installation

English - 33