Dell Venue Pro 11 – 5130 User Manual page 45

Option
Strong Password
Password Configuration
Password Bypass
Password Change
Non-Admin Setup
Changes
TPM Security
PTT Security
Computrace (R)
CPU XD Support
Description
Enable strong password - This option is disabled by default.
This field controls the minimum and maximum number of characters
allowed for the admin and system passwords. Changes to these fields are
not active until they are committed via the apply button or saving changes
before exiting setup.
• Admin Password Min
• Admin Password Max
• System Password Min
• System Password Max
This option lets you bypass the system (Boot) Password and the internal
HDD password prompts during a system restart.
• Disabled
• Reboot Bypass (Default Enabled)
Allows you to determine whether changes to the system and hard disk
passwords are permitted when an administrator password is set.
• Allow Non-Admin Password Changes (Default)
This option lets you determine whether changes to the setup options are
permitted when an administrator password is set.
• Allow Wireless Switch Changes (Default)
This option lets you control whether the Trusted Platform Module (TPM) in
the system is enabled and visible to the operating system.
TPM Security (Default)
• TPM ACPI Support
• Deactivate
• Activate
NOTE: Activation, deactivation, and clear options are not affected if
you load the setup program's default values. Changes to this option
take effect immediately.
Allows you to enable or disable PTT Support.
• PTT Security (Default)
• Revoke Trust (Default)
This field lets you activate / de-activate or disable the BIOS module
interface of the optional Computrace Service from Absolute Software.
• Deactivate (Default)
• Disable
• Activate
This option enables or disables the Execute Disable mode of the
Processor.
45