Download Print this page

Advertisement

Quick Links

In-Wall LCR Speakers
from EMPHASYS have been created
to meet the needs of today's discrimi-
nating listener, offering a blend of
clarity and output that's equal to the
needs of a high-performance home
theater or distributed audio system.
In fact, an EMPHASYS In-Wall LCR is
just as appropriate used singly as the
center channel speaker as it is in a
front left/right pairing. Twin woofer
cones of aluminum (WL55) or poly-
propylene (WL50) combine with a
pivoting dome tweeter for remarkably
lifelike lows and crystal-clear highs.
This manual is designed to facilitate
easy installation and adjustment of the
EMPHASYS In-Wall LCR Series prod-
ucts. To ensure the best performance,
please follow the instructions carefully.
WL55 WL50
Installer's Guide
Positioning the Speakers
EMPHASYS In-Wall LCR speakers can be
used in any position of a home theater
speaker system. A single LCR speaker can
be used for the front center channel, or a
pair can be used for left and right at the
front or rear in the system. Because the
In-Wall LCRs are magnetically shielded, it is
safe to place them close to the television.
The In-Wall LCR Speaker as a Center Channel
In-Wall LCR speakers are designed to blend seamlessly with other EMPHASYS speak-
ers and accessories, and to fill the specific needs of any sound configuration. For best
results using the LCR as a center channel speaker, it should be placed either immedi-
ately above (or below) the TV and, preferably, flush with the screen. The performance
of the overall system can be enhanced by aligning the center channel speaker as near
as possible to the horizontal plane of the front left and right speakers.
Using the In-Wall LCR as Left & Right Speakers
The In-Wall LCRs, when used in the front left and right positions, should be installed in
vertical orientation.

Advertisement

loading

Summary of Contents for Emphasys WL55

  • Page 1 The In-Wall LCR Speaker as a Center Channel front left/right pairing. Twin woofer In-Wall LCR speakers are designed to blend seamlessly with other EMPHASYS speak- cones of aluminum (WL55) or poly- ers and accessories, and to fill the specific needs of any sound configuration. For best...
  • Page 2: Speaker Adjustments

    2. Find the studs nearest the desired location for the speaker. 5. If the area in the wall isn’t already insulated, add insulation EMPHASYS recommends the use of a good stud finder for this material sufficient to fill the cavity. If the insulation material used is procedure.
  • Page 3: Installing The Speakers

    , clamping the drywall (See Diagram 4) between the feet and the flange. Adjusting the Frequency Response for WL55 & WL50 Treble Adjustment Diagram 5: The Treble switch allows +3dB of adjustment from the “0” posi- Adjustment Switches tion, where the most linear frequency response is maintained.
  • Page 4 Vendor’s to the terms of this standard warranty. Purchaser agrees that EMPHASYS shall expense or refund the purchase price. Replacement of any item hereunder...

This manual is also suitable for:

Wl50