General; Installation Instructions - OK. OHO630 User Manual

1.0 General

Carefully read the following important information regarding installation safety and maintenance.
Keep this information booklet accessible for further consultations.
The appliance has been designed as a exhausting version (external exhaust ) or as a filter version
(internal air recycle) cooker hood.

2.0 Installation instructions

2.1 The cooker hood has to be placed at a distance of 65-75cm
(26-30inch) from the cooking surface for the best effect. See Pic 1.
2.2 Install the hook on a suitable place once the installation height is
fixed, and keep it in line. The fixed position of the inside chimney
bracket is the place of chimney.
2.3 Fix the outside chimney bracket on the outside chimney, and be
sure that the inside chimney can be adjusted the height in it freely as
well as fixing the extensible tube. Afterwards, install the extensible
tube and chimney on the cooker hood. See Pic 3.
2.4 Put the cooker hood on the hook. See Pic 4.
2.5 Adjust the height of the inside chimney to the position of the inside chimney bracket and fix
on it by screw, after adjusting the position, fix the body with safety screw. See Pic 5.
Note:
The two safety vents are positioned on the back casing, with diameter of 6mm
•
The extensible pipe is optional accessory, not supplied.
•
Take off protection film before installation.
•
Any installation work must be carried out by a qualified electrician or competent person.
•
Do not connect the ducting system of the hood to any existing ventilation system which is
•
being used for any other appliance, such as warmer tube, gas tube, and hot wind tube.
5