Advertisement
Introduction
This guide provides instructions for installing the Network Camera on your network.
For all other aspects of using the product, please see the User's Manual, available from the Product
CD.
1. Check the package contents against the list below.
2. Install the hardware on page 1
3. Set the IP address on page 2.
IMPORTANT
This product must be installed in compliance with local laws and regulations.
Package Contents
Item
Network Camera
Power Adaptor
Camera Stand
CD
Printed Installation Guide
Accessories
LENS
Hardware Overview
Descriptions
Compact Bullet IP Camera 1EA
PoE only
Supplied with mounting screws
User's manual CD, including product documentation,
installation tools and other software
Installation Guide (this document)
Sun Visor 1Ea
Sun Visor Hold Knob 1Ea
Screw for Camera Sand 3Ea
anchor 3Ea
Screw
L-Wrench 1Ea
Fixed lens
Advertisement
Table of Contents
Related Manuals for Orion OR-234i
Summary of Contents for Orion OR-234i
-
Page 1: Package Contents
Introduction This guide provides instructions for installing the Network Camera on your network. For all other aspects of using the product, please see the User’s Manual, available from the Product 1. Check the package contents against the list below. 2. Install the hardware on page 1 3. - Page 2 Installation Assembly the sun visor and camera. Connect the Wall bracket and camera. Connect the cables 1. Connect the camera to the network using a shielded network cable. 2. Connect the power. • PoE (Power over Ethernet): This is automatically detected when the network cable is connected. Fix the wall bracket on place that user want to install...
- Page 3 Assign an IP address Most networks have a DHCP server that automatically assigns IP addresses to connected devices. If your network does not have a DHCP server, the IP Camera will use 255.255.255.255 as the default IP address. In case you would like to assign a static IP address, the recommended method in Windows is IP Utility. Recommended for Operating system Windows 2000 Windows XP...
- Page 4 Web browser connection Note: The Network camera supports Internet Explorer 7 or above. Please check version of your browser and update it if necessary. When you first access the camera you need to download and install an Active X control from the camera to display a live image.
Need help?
Do you have a question about the OR-234i and is the answer not in the manual?
Questions and answers