Care And Maintenance; Specifications - CO/Tech EMT448ET Original Instruction

Note: To prevent programmes from overlapping, the time lag between two subsequent
programmes must be at least 33 minutes.
Manual switching
This timer allows you to manually switch connected loads on and off.
Press +1 in time display mode to select either:
• ON: Always switched on
• AUTO-ON: Switched on in programme
• OFF: Always off
• AUTO – OFF: Switched off in programme. See fig. 7.
Automatic return to time display
If no key is pressed for a duration of 2 minutes, the display returns to the time
display mode.
Summer / winter time
1. Press RCL. The hour display advances 1 hour and "+1 h" appears on the display
to indicate summer time.
2. Press RCL once more to display winter time again.

Care and maintenance

Wipe the product using a dry cloth as and when required. Never use solvents
or abrasive cleaning agents.
Disposal
Follow local ordinances when disposing of this product. If you are unsure of
how to dispose of this product, please contact your local authority.

Specifications

Programme
Rated voltage
Max load
Shortest operating time
16 ×
230 V AC, 50 Hz
3680 W, 16 A
1 minute
6
fig. 7