1. Manuals
  2. Brands
  3. Eco-Aire Manuals
  4. Heater
  5. 2400
  6. Owner's operation and instruction manual

Eco-Aire 2400 Owner's Operation And Instruction Manual

Window pellet heater
Hide thumbs Also See for 2400:
Table of Contents

Advertisement

Quick Links

See also: Owner's Operation and Instruction Manual
Owner's Operation and Instruction Manual
Window Pellet Unit
CAUTION!
Read All Instructions Carefully
Before Starting The Installation or
Operating This Heater.
Improper Installation Could Void
Your Warranty!
THIS MANUAL WILL HELP YOU TO OBTAIN EFFICIENT, DEPENDABLE SERVICE FROM THE HEATER, AND ENABLE YOU TO ORDER
U
United States Stove Company
227 Industrial Park Road
P.O. Box 151
South Pittsburg, TN 37380
Ussc
WINDOW PELLET HEATER
SAFETY TESTED TO ASTM 1509-04 & ULC S-627-00
SAVE THIS MANUAL FOR FUTURE REFERENCE
REPAIR PARTS CORRECTLY. KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
S
C
S
-
MODEL
2400
PATENT NO.: 7,686,011
SAFETY NOTICE:
If this heater is not properly installed, a house fire
may result. For your safety, follow the installation in-
structions. Contact your local building or fire officials
about obtaining a permit, restrictions and installation
requirements in your area.
C
US
CM
851724C
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2400 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Eco-Aire 2400

Summary of Contents for Eco-Aire 2400

  • Page 1 Owner’s Operation and Instruction Manual WINDOW PELLET HEATER Window Pellet Unit MODEL 2400 PATENT NO.: 7,686,011 SAFETY TESTED TO ASTM 1509-04 & ULC S-627-00 SAFETY NOTICE: CAUTION! If this heater is not properly installed, a house fire Read All Instructions Carefully may result.

  • Page 2: Safety Precautions

    Safety Precautions  IMPORTANT: Read this entire manual before  Disconnect the power cord before performing any installing and operating this product. Failure to do maintenance! NOTE: Turning the ON/OFF Switch so may result in property damage, bodily injury, to ”OFF” does not disconnect all power to the or even death.
  • Page 3 WARRANTY INFORMATION CARD Name__________________________________________ Telephone #: (_____)_____________ City____________________________________________ State_______ Zip_________________ Email Address __________________________________________________________________ Model # of Unit________________________________ Serial #___________________________ Fuel Type: qWood qOther _________________________ qCoal qPellet qGas Place of Purchase (Retailer)______________________________________________________ City____________________________________________ State_______ Zip_________________ If internet purchase, please list website address___________________________________ Date of Purchase _______________________________________________________________ Reason for Purchase: qAlternative Heat...
  • Page 4 Ê É Fold Here Fold Here Fold Here PLACE STAMP HERE United States Stove Company P.O. Box 151 South Pittsburg, TN 37380 Ussc...

  • Page 5: Heating Specifications

    Specifications Heating Specifications BTU output will vary depending on the quality of fuel. Use Heat Output 16,400 BTU/hr. PFI listed fuels for the best results. Heating Capacity 500 - 1,000 sq. ft. Heating capacity will vary depending on floor plan layout of your home, degree of insulation, and the outside Fuel Burn Rate ¾...

  • Page 6: Installation

     Before installing your heater, you must perform an initial burn in an OUTSIDE environment. Follow the Start- Up Procedure in the Operation section of this manual. Your Eco-Aire heater may be installed to code in either a conventional or mobile home (see SPECIAL MOBILE HOME REQUIREMENTS).

  • Page 7: Clearances To Combustibles

    Installation FLOOR PROTECTION This heater must have a non-combustible floor protector (ember protection) installed beneath it if the floor is of combustible material. If a floor pad is used, it should be UL listed or equal. The floor pad or non-combustible surface should be large enough to extend a minimum of 6-inches [152mm] in front and 2-inches [51mm] on each side of the heater.

  • Page 8: Window Installation

    Window Installation When Installing your heater in a window • Select a window of adequate size and with the ap- propriate clearances needed for a safe installation. The mounting hardware supplied is designed for the appliance to be installed in the approximate center of the window.
  • Page 9 Window Installation TWO-SIDED TAPE WINDOW Sill MOUNT- ING BRACKETS SCREW Installing the filler panels • Begin by assembling the left and right side filler panels together. Slide part A into part B; Notice the range of adjustment. If the openings on each side of the heater exceeds this range, you will have to fill the gap by other means necessary to keep the window/ opening weather tight.

  • Page 10: Wall Installation

    Wall Installation When Installing your heater in an exterior wall [648mm] • Select a wall to the exterior of the building. This wall should have the required clearance to combustibles inside and out mentioned earlier in this manual. Make certain that electrical wires, conduit, water or gas pipes do not pass through the area you have selected •...

Table of Contents