Firmware Update; Factory Reset - Monitor Audio ASB-2 Quick Start Manual

Auto On / Off
Auto On / Off enables the ASB-2 to be turned on and
off by the TV it is connected to. The TV will need to
have its version of HDMI Power Control enabled for
this to work.
INPUT SELECT
3D AUDIO
EQUALISATION
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
OSD LANGUAGE

FIRMWARE UPDATE

FACTORY RESET

AUTO OFF TIME
HDMI PASS THROUGH
AUTO ON / OFF
FRONT LED BRIGHTNESS
Front LED Brightness
The intensity of the main LED can be adjusted if it is
too bright for your requirements.
There are three settings, bright (default), dim and off.
INPUT SELECT
Dim will set it to 50% intensity.
3D AUDIO
If set to off, the only feedback will be via the button
LED's and the On Screen Display. EQUALISATION
CHANNEL LEVELS
INPUT SELECT
SUB OUT
3D AUDIO POWER OPTIONS
OSD LANGUAGE
EQUALISATION
FIRMWARE UPDATE
CHANNEL LEVELS
FACTORY RESET
SUB OUT
POWER OPTIONS
OSD LANGUAGE
FIRMWARE UPDATE
FACTORY RESET
AUTO OFF TIME
HDMI PASS THROUGH
AUTO ON / OFF
FRONT LED BRIGHTNESS
18
INPUT SELECT
3D AUDIO
AUTO OFF TIME
EQUALISATION
HDMI PASS THROUGH
CHANNEL LEVELS
AUTO ON / OFF
SUB OUT
FRONT LED BRIGHTNESS
POWER OPTIONS
OSD LANGUAGE
FIRMWARE UPDATE
FACTORY RESET
INPUT SELECT
3D AUDIO ON
EQUALISATION
OFF
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
OSD LANGUAGE
FIRMWARE UPDATE
FACTORY RESET
CURRENT VERSION
CHECK FOR UPDATE
AUTO OFF TIME
HDMI PASS THROUGH
AUTO ON / OFF
FRONT LED BRIGHTNESS
BRIGHT
DIM
OFF
Firmware Update
Here, you can see what version of firmware the ASB-2
is currently running and check to see if an update is
available, although the ASB-2 will automatically check
for an update every time it is connected to the internet.
INPUT SELECT
3D AUDIO
EQUALISATION
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
ON
OSD LANGUAGE
OFF
FIRMWARE UPDATE
FACTORY RESET
CURRENT VERSION
CHECK FOR UPDATE
You may be asked for the firmware version should
you contact Monitor Audio for any technical or set up
advice.
To check to see if the firmware is up to date, use the
arrow buttons on the remote to navigate to 'Check for
Update' and press the right arrow.
CURRENT VERSION
CHECK FOR UPDATE
It will then check and inform you that either it is up
to date, or that there is an update available. If there
is an update available, it will go through the update
procedure on page 22.
FIRMWARE UP TO DATE
UPDATE AVAILABLE.
PRESS 'OK' TO PROCEED
Factory Reset
BRIGHT
This resets all of the customisable settings within the
menu structure of the ASB-2 back to their original,
DIM
factory settings.
OFF
HINTS
The Firmware will remain as the most recent
version.
The Wi-Fi settings will have to be re-entered.
Refer to page 10
CURRENT VERSION
CHECK FOR UPDATE
v#.##
FIRMWARE UP TO DATE
UPDATE AVAILABLE.
PRESS 'OK' TO PROCEED
UPDATE IN PROGRESS.
PLEASE WAIT
v#.##