Functions List - FUTABA 4PX User Manual

Function Name Description Of Function
Model select
Model memory call
Model copoy
Model memory copy
LED setting
LED on/off, jog LED on/off
S.BUS servo
S.BUS servo Link software setting
Sensor
Telemetry sensors setting
Sensor list
Telemetry sensors list
Telemetry
Telemetry data screen
MC851C/602C/402CR/950CR/940C
MC-Link
R/960CR Link software setting func-
tion
Condition
2ND condition
User name
User name set/modify
Battery
Battery type setting
Date and time
Date and time setting
Steering wheel and throttle trigger
Calibration
correction
Display
LCD contrast/backlight setting
End point
End point adjustment
Fail safe
Fail safe, battery fail safe
Information
Language setting / version information
Model name
Model memory name set/modify
Model memory reset (Model, Direct
Data reset
menu, All)
Ch. Reverse
Servo operation reversing
Sound setting (telemetry sound, alarm
Sound
sound, operating sound)
Sub Trim
Servo center position fine adjustment
Receiver type/servo tyoe selection/
Receiver
linking with telemetry type T-FHSS
system receiver
Response
etting of the response
Function List
Function
Servo view
D/R,ATL
Dial select
SW select
Acceleration
Steering curve
Throttle curve
Steering speed
Throttle speed
Start
Engine cut
A.B.S
Brake mixing
Tilt mixing
Trigger
Idle up
Program.
mixing 1-5
4WS mixing
Dual ESC
Gyro mixing
CPS mixing
Steering
mixing
Timer
Description Of Function
Displays servo operation on a bar
graph
Steering angle adjustment while run-
ning/ Brake side adjustment
Selection of functions operated by
digital dial and digital trim
Selection of functions operated by
push switches
Reduces the "lag time" of the throttle
from the neutral position.
Steering curve adjustment
Throttle curve adjustment
Steering servo delay
Throttle servo delay
Throttle preset at start function
engine cut off by switch
Pumping brake
Front and rear independent brake con-
trol for 1/5GP car, etc.
Outboard engine tilt mixing
Neutral brake and throttle servo for-
ward side and brake side operation
rate setting/Trigger SW
Idle up at engine start
Programmable mixing between arbi-
trary channels
4WS mixing
Front and rear ESCs mixing
The sensitivity of Futaba car rate gy-
ros can be adjusted
The CPS-1 of Futaba LED controller
can be adjusted.
Twin servo mixing of the steering
Up, down, lap, or lap navigation timer
45