Gas Leaks - Dometic COE-C Operating And Installation Instructions

2
section of each cable must be at least 1.0 mm . All three poles are marked with the
appropriate symbols on the terminal.
THE ELECTRIC SYSTEM (IN THE CASE OF THE COE ... DUFU MODELS)
MUST BE INSTALLED BY AN AUTHORISED TECHNICIAN IN
ACCORDANCE WITH THE APPLICABLE REGULATIONS.
NEVER CONNECT THE 12 V DC CONNECTION TERMINAL TO THE 230 V
AC MAINS NETWORK. THIS WOULD NOT ONLY DESTROY THE
ELECTRICAL AND ELECTRONIC COMPONENTS, BUT WOULD ALSO
ENDANGER THE USER.

6. GAS LEAKS

When inspecting for gas leaks, we recommend the use of an electronic type-tested gas
detector. In the event of a fault, the valve of the gas supply network must be closed.
Consult your fitter, dealer or specialised technician.
6