Advertisement
Quick Links
Advertisement
Related Manuals for kinetic GymAware
Summary of Contents for kinetic GymAware
- Page 1 Quick Start Guide...
-
Page 2: What's In The Box
TETHER SLOT VELCRO At Kinetic we value your feedback on our products and hope that you will contact us with any questions or STRAP comments you may have. This quick start guide is designed to get you up and running. For further help check out our website at TETHER http://kinetic.com.au/index.php/support-ga... -
Page 3: Initial Setup
Initial Setup The PowerTool Download the GymAware App from the iTunes store Log on to the iTunes store and download the appropriate free GymAware App. Note: For the latest GymAware Each GymAware kit contains: • PowerTool device features make sure your iOS device is running the latest software. - Page 4 Initial Setup - Manual Pairing When successfully paired the PowerTool will beep twice and the green LED will change to a continuous orange LED. Select the GymAware App - Make sure Bluetooth is ON. The LED will change from The PowerTool name should...
- Page 5 If you stop pulling the tether the PowerTool will revert back to accepting new connections, indicated by green You can now stop pulling the tether as the GymAware App flashing LED. will automatically open. You will need to follow Step 2 - Manual Pairing.
- Page 6 (GymAware Lite) In the GymAware App By default Angle Make sure the PowerTool tether is Select the GymAware App - Select Test Subjects (This is Measurement is set to ON not attached and fully retracted into either Lite or Online/Pro...
- Page 7 PowerTool Setup PowerTool Setup On the Floor Attaching the Velcro Strap Positioning of the PowerTool for optimal performance. Use the magnetic feet of the PowerTool to hold it firmly in position. Thread the Velcro strap around the bar with the fuzzy side to the outside.
- Page 8 The PowerTool can be attached to any pin-loaded weights machine. The GymAware PowerTool can be mounted above the lifting platform as an alternate position. You will need to purchase a ceiling bracket and mount it using the additional mounting screws provided.
-
Page 9: Troubleshooting
Trouble Shooting Trouble Shooting PowerTool Hardware Bluetooth ISSUE: Battery Warnings ISSUE: Pairing Unsuccessful PowerTool emits two long beeps and The red LED starts flashing when the The PowerTool continuously beeps and First allow the PowerTool to If this doesn’t work, forget the switches off when tether pulled. - Page 10 - as above GA #241. disappeared from the device complete power down. Click on the (i) list. You now need to manually pair (See Part 2 of the manual) NOTE: If problems persist please contact Kinetic on +61 2 6162 1770 or help@kinetic.com.au...
- Page 11 GymAware Software Options GymAware PowerTool FREE Lite Online* Pro* Video capture All the features of All the features of Meta export GymAware Lite and GymAware Online and Language support Maximum 50 sets Squad management Analysis reports Real-time results Unlimited data...
Need help?
Do you have a question about the GymAware and is the answer not in the manual?
Questions and answers