Advertisement
Your telephone
3 Line Display
Calls LED
When in standby display
Red calls LED flashes to
Access Settings menu.
shows time and date,
indicate an incoming call.
Press when viewing Calls
messages received and any
list, directory or redial list
calls in the calls list.
to view sub-menu list.
Recall for use with a switchboard/
Press to move back to previous
PBX and BT Calling Features.
menu screen or press and hold
to return to standby.
Access last number called.
Press to dial a displayed number.
Use to scroll up through the menu,
Press to confirm a menu selection.
directory and Calls list.
Mute
Use to increase or
Press to use
Lets you talk to someone in the
decrease the handset or
handsfree mode.
same room without the person you
loudspeaker volume.
Green LED illuminates
are calling hearing you. Red LED
when handsfree is on.
illuminates when mute is on.
Answer Machine control buttons
During playback, press to delete
Press once to repeat the message
the message being played.
or press and hold to skip back to
After playback, press to delete
the previous message.
all messages.
Use to delete entered
digits/letters.
Use to switch the answering
Stop message playback.
machine on and off.
2
Go!
Making calls
Use to store and dial
directory entries.
Lift handset and dial telephone number. To end the call, replace the handset.
Mute
Press and release
will illuminate to indicate mute is on.
Press and release
Handsfree
Press
during a call. Place the handset back on the base. Continue your conversation in
handsfree mode. The green LED on the button illuminates when handsfree is on.
To switch back to using the handset at any time during the call, simply lift the handset.
Redial
Lift the handset (or press
10 numbers dialled. Press
Access Calls list.
Directory (up to 100 entries)
Use to scroll down through the
menu, directory and Calls list.
Storing new directory entries
Press
.
Use to access a range of useful
pre-stored numbers and further
If the directory is empty: Phonebook Empty will be displayed briefly and then Add Entry,
BT Calling Features.
press
.
If there are already entries stored, the first alphabetical entry will be displayed.
Press
to display Add New Entry and press
Enter the name for the entry using the keypad then press
Enter the telephone number for the entry using the keypad then press
Entry Saved is displayed.
Dial a directory entry
Press
, then
Or, to search alphabetically:
Enter the first letter of the name you want e.g. for Emma, press
names beginning with E, then scroll using
Press
to dial the displayed entry.
Microphone
Caller Display and the calls list
When using handsfree
your voice is projected
through the base
You must subscribe to a Caller Display service for this feature to work. Your network
microphone.
provider may charge you for this service.
View and dial from the calls list
Press
. Calls are listed in order from newest to oldest. New will be displayed if the call
Press to skip forward to the
is new (unanswered).
next message.
If the caller's details are stored in the directory and an exact match is found, the caller's
name will be displayed as well as the number and the date and time the call was received.
Scroll
or
Press to play messages.
To dial the displayed number, lift the handset or press
During playback, press to
pause a message, press again
to resume playback.
during a call to activate mute mode. The red LED on the button
Mute
again to return to your caller.
Mute
), then press
. Scroll
or
through the last
to dial the number displayed.
.
.
.
or
to scroll to the directory entry you want.
twice to display
or
to the name you want.
through the list.
or
.
Answering machine
Your answering machine is on and ready to record messages. The controls are shown
in the base diagram to your left. For detailed instructions of all the answering machine
features see the online user guide at www.bt.com/producthelp
Switch the answering machine on/off
Press the
button to switch between Answer On and Answer Off. The selected
setting will be announced.
Record your own outgoing message
Press
. Answer Machine will be displayed, press
to scroll to Outgoing Message and press
Press
Scroll
to display Record OGM, then press and hold down the
After the beep, speak your message clearly into the microphone on the base
(located on bottom right of base).
To end recording, release the
button. Your message will be played back to you.
Set the answer mode
Press
. Answer Machine will be displayed, press
Answer Mode will be displayed, press
.
The current mode will be displayed. Use the
or
setting you want, either Answer & Record or Answer Only and press
Set the answer delay
This sets the number of times your phone will ring before the answer machine picks up
the call. The settings are 2-9 rings or Time Saver.
Press
. Answer Machine will be displayed, press
to scroll to Answer Settings and press
Press
Answer Delay will be displayed, press
.
The current setting will be displayed. Use the
or
setting you want (2-9 rings or Time Saver) and press
For compatibility with BT 1571 or another voicemail service it is advisable to keep
to the default setting of 5 rings or lower.
Help
Most problems can be fixed with a few simple checks.
Problem
Solution
No dial tone
Only use the cables supplied.
Make sure the telephone line cord is plugged in correctly.
No display
Make sure the mains power adaptor is plugged in correctly
and the power is switched on at the wall socket.
Using broadband on the same
Make sure you plug the phone
phone line?
into the wall socket via an ADSL
microfilter (not supplied), otherwise
you may have problems with this
product and your broadband service.
Find out more
• New Frequently Asked Questions available at www.bt.com/producthelp
• If you need more detailed instructions, a full user guide is available to
download from www.bt.com/producthelp
.
.
button.
.
buttons to scroll to the
.
.
.
buttons to scroll to the
to confirm.
ADSL
microfilter
Advertisement
