BT Decor 210 User Manual

BT Decor 210 User Manual

Corded telephone

Advertisement

Quick Links

Decor 210 ~ Edition 6.1 ~ 30th May '01 ~ 3527
At a glance
Liquid Crystal Display
Displays dialled numbers and
numbers stored in the memory.
Also displays call timer, and other
visible information.
One-Touch memory buttons
(M1,M2,M3)
Allows you to store and dial up to
Decor 210
three numbers at the touch of a
button. If pressed when handset
is down these are dialled
automatically using handsfree.
Secrecy/Music on hold button
Press to talk to someone in the
same room without your caller
hearing you. When pressed music
will be played to both you and
your caller.
1
2
3
4
5
6
Handsfree button
Allows you to hold a conversation
over the loudspeaker without
7
8
9
lifting the handset.
0
Volume button
Use to adjust the volume during
Vol
S
Handsfree
handsfree operation.
1
Safety information
General
Simply clean your Decor 210
with a damp (not wet) cloth, or an
antistatic wipe. Never use household
Quickdial button
polish as this may damage the
Allows you to dial the 10 numbers
product. Never use a dry cloth as
stored in the Quickdial memory
this may cause static shock.
at the touch of two buttons.
Do not open the Decor 210. This
could expose you to high voltages
Also used as a dial button when
or other risks.
using preparatory dialling.
Environmental
Do not expose to direct sunlight.
Call indicator light
We recommend that you do not
Flashes to indicate an incoming
call. Also flashes when storing
numbers and setting the ringer.

Setting up

Store button
Use to store numbers in the
memory and to change the ringer
Plan the location of
and pitch volume.
your Decor 210.
Quickdial
Situate your Decor 210 close
Recall button
enough to a phone socket so
For use with a switchboard/PBX
that the line cord will reach.
and BT Select Services. Please
contact your switchboard supplier
You can wall-mount your
Store
for more information. For more
product, see back page.
information on BT's Select
Services, please call Freefone
R
0800 800152.

Using the telephone

Redial
Redial/Pause button
Redials the last number called.
Making and ending
Also, press to enter a pause when
storing a number.
calls
To make a call
Lift the handset and wait for
the dial tone.
The
icon will be shown on
Handset hook
the display to indicate that the
Keeps the handset in place when
the Decor 210 is wall mounted.
phone is in use.
See pages 9 & 10 for more
Dial the telephone number.
information.
Or
Revolve the handset catch on the
base unit. The handset will now
Preparatory dialling
be able to rest on the hook when
wall-mounted.
Dial the telephone number
without lifting the handset.
2
Call timer
To switch secrecy
on and off
Your Decor 210 automatically
During a call press and release
place the product on antique/
times the duration of all
veneered wood to avoid damage.
the SECRECY button.
outgoing external calls. The
Do not stand your product on
display will show
to
Your caller will be put on hold
carpets or other surfaces which
indicate that call timer is on.
generate fibres, or place it in
and both you and the caller
The call duration will be
locations preventing free flow of
will hear music. You can now
air over its surfaces.
shown both during the call
talk to someone in the room
and for a few seconds after it
Do not submerge any part of
without your caller hearing
your product in water and do not
is completed.
you. The display will flash
use it in damp or humid
SECRECY to confirm secrecy
conditions, such as in bathrooms.

To receive a call

is on.
Do not expose your product to
When the telephone rings the
fire, explosive or other hazardous
Press and release the
call indicator light will also
conditions.
SECRECY button again to
flash to indicate that there is
return to your caller.
an incoming call. Simply pick
up the handset.
To redial the last
When secrecy is in use, and
number called
another telephone connected to
Lift the handset.
the same line is picked up, secrecy
Plug your Decor 210
is cancelled and the call will be
Press the REDIAL button.
transferred to that telephone.
into the telephone
The last number called is
socket.
displayed and then dialled.

Handsfree talking

A redial number can be no
The handsfree feature allows
longer than 32 digits.
you to use the phone without
Your Decor 210 is now ready
You can also press the REDIAL
picking up the handset, giving
for use.
button when the handset is
you more freedom when you
down to check the number first.
are speaking on the phone.
If it is correct, press the
You can hear the caller's voice
QUICKDIAL button. The
through the in-built speaker.
number will be dialled
automatically using handsfree.
It is shown on the display but
Your Decor 210 is specially
will not be dialled. If you have
Note
designed to operate without the
entered the number incorrectly
need of a mains power supply.
If the telephone has been
press the HANDSFREE button
It is therefore necessary to make
unplugged the last number dialled
or lift the handset to clear the
your first call via the handset.
will not be saved.
This call should last at least
number.
1 minute. Subsequent calls can
If the number is correct, press
now be made using the handset

Secrecy/Music on hold

the QUICKDIAL button. Your
or handsfree feature.
Decor 210 will automatically
When on a call you can talk to
dial the number using
someone in the same room,
handsfree. The call can now be
without your caller hearing.
taken using handsfree or you
can use the handset.
To end a call
Replace the handset.
3
4
To make a handsfree call
To adjust the
ringer volume
Press the HANDSFREE
button.
There are 3 ringer volume
settings to choose from:
The handsfree light will come
HIGH, LOW or OFF.
on and you will hear the dial
The default setting is HIGH.
tone. The display will also
show the volume level.
Lift the handset and press the
STORE button.
Dial the telephone number.
Press the
button.
You can now talk to your caller
The display will show: BELL
through the microphone, or
LEVEL HI
pick up the handset to speak
to your caller privately.
Press either, 1 for HIGH, 2
for LOW or 3 for OFF.
To receive a call in
handsfree mode
Press the STORE button.
Your selected setting will be
Press the HANDSFREE button
displayed.
Note
when the phone rings.
You will hear a confirmation
tone and the display will show
Note
SAVEd.
You can swap between using the
Replace the handset.
handset and handsfree during a
call.
(If the ringer is set to OFF,
If using the handset, press the
the call indicator light will still
HANDSFREE button and replace
flash to indicate someone is
the handset.
calling you. The display will
If using handsfree, lift the handset
show RINGER OFF when you
to talk privately.
lift the handset or use
handsfree.)
To change the volume
To set the ringer pitch
on a handsfree call
The ringer pitch can be set to
You can adjust the speaker
HIGH or LOW. The default
Important
volume when you are on a
setting is HIGH.
handsfree call.
Lift the handset and press the
Note
STORE button.
You can only change the volume
#
Press the
button.
of a call when using handsfree.
The display will show BELL
Pitch HI.
Press the VOLUME button.
Press either, 1 for HIGH or 2
The volume level will be
for LOW.
shown on the display
.
Press the STORE button.
There are 5 levels to choose
from. It is pre-set to the
You will hear a confirmation
mid-range level. Press the
tone and the display will
VOLUME button to move up
show SAVEd.
and down each level.
Replace the handset.
5

One-Touch memories

down. Simply press the
memory location number
You can store your three
(M1,M2,M3). Your Decor 210
most frequently used
will automatically dial the
telephone numbers in the
number using handsfree.
One-Touch memories (M1,
M2 or M3). Please note that
To insert a pause in
the number can be no longer
a memory number
than 18 digits.
Sometimes you may need to
enter a pause when storing a
To store a one
number, e.g. with an
touch number
overseas number you may
Lift the handset.
need to enter a pause after
Press the STORE button.
storing the international
The display will show Loc-.
code.
Press the REDIAL button in
Press the memory location
the place where you want to
number, (M1,M2,M3), under
which you want to store the
enter a pause.
number. The display will
When you dial the number
show, e.g. Loc-dl if you want
your Decor 210 will
to store in M1 location.
automatically insert the
pause where you stored it.
Enter the telephone number
you want to store, including

Quickdial memories

the area code if applicable.
You can store a further 10
Press the STORE button.
telephone numbers in the
You will hear a confirmation
Quickdial memories. Please
tone and the display will show
note that the numbers can be
SAVEd. Replace the handset.
no longer than 18 digits long.
To store a number in
Note
the Quickdial memory
Whilst storing a number in
Lift the handset.
the memory you can cancel
the operation by replacing the
Press the STORE button.
handset on the cradle.
Enter the memory location
number between 0 and 9,
To dial a One-Touch
under which you want to
number
store the number. The display
shows, e.g. Loc-8 if you want
Lift the handset and wait for
to store in location 8.
the dial tone.
Enter the telephone number
Press the memory location
you want to store, including
number, (M1,M2,M3), under
the area code if applicable.
which the number is stored.
Press the STORE button.
The number is displayed and
You will hear a confirmation
dialled automatically.
tone and the display will show
You can also dial a One-Touch
SAVEd. Replace the handset.
number when the handset is
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Decor 210 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BT Decor 210

  • Page 1 Decor 210 ~ Edition 6.1 ~ 30th May ’01 ~ 3527 Call timer To switch secrecy To make a handsfree call To adjust the One-Touch memories down. Simply press the At a glance Safety information on and off ringer volume...
  • Page 2: User Guide

    Decor 210 ~ Edition 6.1 ~ 30th May ’01 ~ 3527 To delete stored General information Wall Technical information Note numbers How many telephones can There is a Quickdial memory Lift the handset. you have? mounting label included on the reverse side of your handset and a Press the STORE button.

Table of Contents