Related Manuals for SmartLab Move
Summary of Contents for SmartLab Move
- Page 1 3-D Step counter with wireless data transfer User Manual Please read this instruction thoroughly before first using this device...
- Page 2 3-D sensor technology, this device counts normal steps as well as lunges or backward steps. You can comfortably put it in your pocket and it will count all your movements. The smartLAB® move is available in six different colours. To save power the device does not have a display. Three LED‘s show you the battery status and daily goal achievement status.
- Page 3 Notice: You will receive the needed gateway from your portal provider. 2. Mounting the carrying cord You can wear your smartLAB move with the carrying cord included in the set. To do so, you will have to ® connect the cord to the device by doing the following steps: Push the thin end of the cord through the two tiny eyes at the back side of the device (pict 2).
- Page 4 The „Shake“ function With the shake function of the smartLAB® move you can check your battery status and your daily goal status. The three LED‘s (green, orange, red) on the bottom of the device show you the relevant status. The meaning of the different options will be described below.
- Page 5 Warranty HMM Diagnostics GmbH products need to fulfill high quality requirements. Because of this reason, HMM Diagnostics GmbH gives a 2-year warranty by purchasing this smartLAB product. You can even extend the ® warranty from 3 to 5 years without extra pay when you register your product. Please register online under following website: www.hmm.info/en/registration.
Need help?
Do you have a question about the Move and is the answer not in the manual?
Questions and answers