Table of Contents
Advertisement
Notes on connecting to the
mains water supply
Connection to the mains water
supply should only be carried out by
a qualified and competent person in
accordance with national and local
regulations.
Before plumbing the appliance in,
ensure that it is disconnected from
the mains electricity supply.
Turn off the water supply at the tap
before connecting the water inlet
hose for the ice cube maker.
The water quality must conform to
the requirements for drinking water
in the country in which the appliance
is being installed.
This appliance meets the requirements
of IEC 61770 and EN 61770.
Mains water connection
This appliance has to be installed in
accordance with AS/NZS 3500.1
and AS/NZS 3500.2.
Back flow prevention is already
integrated in the appliance.
The appliance must only be connected
to a cold water pipe that
– is directly connected to the fresh
water supply in order to ensure
circulation of the water in the cold
water pipe.
Avoid using a water inlet in which
the water is allowed to pool.
This can affect the taste of water
and ice cubes.
– maintains working pressure.
– meets hygiene regulations.
– The water pressure (flow rate) must
be between 1.5 and 6.0 bar.
59
Advertisement
Table of Contents
