Miele KFN 14827 SDE ed/cs Operating And Installation Instructions page 82

Changing the door hinging
Refitting the upper door
^ Then fit the upper door on middle
hinge pin i.
^ Close the upper door.
^ Fit hinge plate n onto the opposite
side and secure it with screws m.
If necessary drill pilot holes for the
screws or use a battery operated
screwdriver.
^ Refit cover k on the opposite side.
^ Align the door with the appliance
housing using the long slots in the
lower hinge plate. Then tighten the
screws.
82
Replacing the upper soft-close door
mechanism
^ Remove cover a from panel b,
rotate it by 180° and refit it on the
other side.
^ Insert the soft-close mechanism back
into the door, starting at the right
hand side.
^ Slide the soft-close mechanism back
into the door as far as it will go
towards the appliance using a
flat-headed screwdriver.
The screw holes on the left and right
must line up perfectly.