Table of Contents
Advertisement
Changing the door hinging
^ Screw hinge plate g into position on
the opposite side using the two outer
long slots only. To make it possible to
align the door later, do not replace
the centre screw at this stage.
^ Important. Screw the adjustable foot
c into hinge pin a as far as it will go.
^ Place hinge pin a together with disc
b and adjustable foot c with the
guide at the end of the threaded pin
and screw it in.
^ Then tighten threaded pin d.
^ Place the lower door onto hinge pin
c from above.
^ Close the lower door.
80
^ Fit hinge pin i into middle hinge
plate k in the lower door.
Replacing the lower soft-close door
mechanism
^ Remove cover a from panel b,
rotate it by 180° and refit it on the
other side.
Hide quick links:
Advertisement
Table of Contents
