Safety Belt Height Adjustment; Safety Belt Warning Lamp And Indicator Chime - Ford 2015 Fusion Owner's Manual

SAFETY BELT HEIGHT
ADJUSTMENT
WARNING
Position the safety belt height
adjuster so that the belt rests across
the middle of your shoulder. Failure
to adjust the safety belt properly could
reduce the effectiveness of the safety belt
and increase the risk of injury in a crash.
Adjust the height of the shoulder belt so
the belt rests across the middle of your
shoulder.
E145664
Conditions of operation
The driver's safety belt is not buckled
before the ignition switch is turned to the
on position...
The driver's safety belt is buckled while the
indicator light is illuminated and the
warning chime is sounding...
The driver's safety belt is buckled before
the ignition switch is turned to the on posi-
Fusion (CC7) Canada/United States of America, enUSA
Safety Belts
If...
tion...
To adjust the shoulder belt height:
1. Pull the button and slide the height
adjuster up or down.
2. Release the button and pull down on
the height adjuster to make sure it is
locked in place.
SAFETY BELT WARNING LAMP
AND INDICATOR CHIME
This lamp illuminates and an
audible warning will sound if the
driver's safety belt has not been
fastened when the vehicle's ignition is
turned on.
The safety belt warning light illuminates 1-
2 minutes and the warning chime sounds
4-8 seconds.
The safety belt warning light and warning
chime turn off.
The safety belt warning light and indicator
chime remain off.
32
Then...