Removing A Headlamp - Ford 2015 Fusion Owner's Manual

Hide thumbs Also See for 2015 Fusion:

Table of Contents

REMOVING A HEADLAMP

Note: To remove push pins, use a

flat-bladed screwdriver to pull up the center

release pin.

Make sure the headlamp control is in

the off position and open the hood.

2. Remove the six push pins securing the

front fascia to the front trim cover.

3. Remove the three bumper cover upper

screws using a flat-bladed screwdriver.

4. Remove the push pin at the inboard

side of the headlamp you are servicing.

Fusion (CC7) Canada/United States of America, enUSA

5. Remove the two screws securing the

headlamp using a flat-bladed

screwdriver.

6. Remove the lower three wheel housing

fasteners by turning them

counterclockwise.

Table of Contents