Starting A Gasoline Engine; Ignition Modes; Vehicles With An Ignition Key - Ford 2015 Fusion Owner's Manual

Hide thumbs Also See for 2015 Fusion:
Table of Contents

Advertisement

Starting and Stopping the Engine

Ignition Modes

E144447
The keyless starting system has three
modes:
Off: Turns the ignition off.
Without applying the clutch pedal
(manual transmission) or brake pedal
(automatic transmission), press and
release the button once when the
ignition is in the on mode, or when the
engine is running but the vehicle is not
moving.
On: All electrical circuits are operational
and the warning lamps and indicators
illuminate.
Without applying the clutch pedal
(manual transmission) or brake pedal
(automatic transmission), press and
release the button once.
Start: Starts the vehicle. The engine may
not start when the vehicle starts.
Press the clutch pedal (manual
transmission) or brake pedal
(automatic transmission), and then
press the button for any length of time.
An indicator light on the button
illuminates when then ignition is on and
when the engine starts.
Fusion (CC7) Canada/United States of America, enUSA
STARTING A GASOLINE
ENGINE
When you start the engine, the idle speed
increases. This helps to warm up the
engine. If the engine idle speed does not
slow down automatically, have your
vehicle checked by an authorized dealer.
Note: You can crank the engine for a total
of 60 seconds (without the engine starting)
before the starting system temporarily
disables. The 60 seconds does not have to
be all at once. For example, if you crank the
engine three times for 20 seconds each
time, without the engine starting, you
reached the 60-second time limit. A
message appears in the information display
alerting you that you exceeded the cranking
time. You cannot attempt to start the engine
for at least 15 minutes. After 15 minutes, you
are limited to a 15-second engine cranking
time. You need to wait 60 minutes before
you can crank the engine for 60 seconds
again.
Before starting your vehicle, check the
following:
Make sure all occupants have fastened
their safety belts.
Make sure the headlamps and
electrical accessories are off.
Make sure the parking brake is on.
Move the transmission selector lever
to a low gear (manual transmission)
or park (P) (automatic transmission).
Switch the ignition key to position II. If
your vehicle is equipped with a keyless
ignition, see the following instructions.

Vehicles with an Ignition Key

Note: Do not touch the accelerator pedal.
1.
Fully press the brake pedal. If your
vehicle is equipped with a manual
transmission, fully press the clutch
pedal also.
146

Advertisement

Table of Contents
loading

Table of Contents