Zte MF730M Quick Manual

LEGAL INFORMATION
Copyright © 2013 ZTE CORPORATION.
MF730M
All rights reserved.
3G USB Modem
This guide is published by ZTE Corporation, which reserves the right to amend or
Your Quick Guide update its content without prior notice. No part of this guide may be reproduced,
translated or used in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without the prior written permission of ZTE Corporation.
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Version No.: 1.0
Postcode: 518057
Tel: +86-755-26779999 Edition Time: 2013, 07
URL: http://www.ztedevice.com
E-mail: mobile@zte.com.cn
1
Welcome Understanding the indicator light
The ZTE MF730M USB modem works on all the following networks: DC-HSDPA;
Indicator status
HSPA+; HSUPA; WCDMA; EDGE; GPRS, and GSM.
Red On but not connected to network
Getting to know your device
Green Blinking Connecting to 2G/3G and data transfer
Green Solid Connected to 2G/3G
1. microSD card slot
Five simple steps and you'll be online...
2. SIM/USIM card slot
3. USB Connector
1. Open the front cover – gently sliding it back to avoid damage.
4. Modem Cap
5. Front Cover
(Device appearance and detail may vary.)
2 3
3.
Description
2. Insert a standard-size SIM card.
This modem only supports microSD card. (The microSD Logo (
trademark of SD-3C, LLC.)
4.
4
If you have one, Insert the microSD card.
5. Firmly plug the USB connector into your computer's USB port.
) is a
Replace the front cover, clicking it into place.
5 6
The computer operating system will automatically recognise the new hardware.
Depending on the make and operating system of your PC, you will be taken to the
operator's landing page or the device administration page (if the device doesn't
connect), or you will be able to open your browser to access the internet directly
(Windows 8 only). The LED indicator lights (see above) will show the connectivity
status during the start up process.
6. Settings – Accessing the Web User Interface (UI).
From the Home page of the Web UI you can access the main settings for: Statistics,
Messages, Updates, Settings and to check the device status. You can access the URL
(http://m.home or http://192.168.0.1 )via your web browser.
You should never need to change the settings; this is recommended for advanced
users only.
Disconnect from the Network - To disconnect from the network, just remove the modem
from the PC directly.
7