Table of Contents
Advertisement
11.2.2 User's interface
After opening the APT Program, it will appear a window like Fig.20, several proves as follows:
1.
Title: Read the station and version from equipment_config.txt, for example: Station:
BOARD_TRIM_1 Version: APT V1.8.7
2.
Script file: File of test script; show the testing script file location and file name.
3.
FT: It will select the script for Final Test.
4.
Cal: It will select the script for Calibration.
5.
COM: Show the communication port connected with mobile phone at present.
6.
List: The large window on the right shows the tests list at present.
7.
Progress Bar: Show that the test progress at present.
8.
Serial Number: Same as Bar Code.
9.
Real Time: Show the time of the computer.
Fig.20
User's interface
125
Advertisement
Table of Contents
