Table Of Contents; Applications; Functions And Controls; Accessories - Strong SP-80A Operation Manual

CONTENTS
..............................................................1
Applications ..............................................................1
Functions and controls ................................................1
Accessories...............................................................1
Hazards and risks ....................................................1-2
Operation .................................................................2
Care and preventive maintenance ...............................3-4
Specifications.............................................................5
Transportation..................................................,,,,,,,,,,,6
Trouble shooting...............................................,,,,,,,,,,,6
Explosive Diagram & Part List..............................,,,,,,8-13
INTRODUCTION
selection of our equipment.
We have taken care in the design, manufacture and testing of
this product. It is covered by a six month warranty. Should service
or spare parts be required, prompt and efficient service is
available from our company or our agent.
General Safety instruction for the Operation of
Power Equipment.
The goal of our company is to produce power equipment that
helps the operator work safety and efficiently. The most important
safety device for this or any tool is the operator. Care and good
judgement are the best protection against injury. All possible
hazards cannot be covered here, but we have tried to highlight
some of the important items, individuals should look for and obey
caution, Warning and Danger signs placed on equipment, and
displayed in the workplace. Operators should read and follow
safety instructions packed with each product.
Learn how each machine works. Even if you have previousl y
used similar machines, carefully check out each machine before
you use it .Get the -feel‖ of it and know its capabilities, limitations,
potential hazards, how it operates, and how it stops.

APPLICATIONS

Trench compaction
Road maintenance
Brick paving

FUNCTIONS AND CONTROLS

The motor is controlled by an ON/OFF switch or push button
which is mounted on the motor below the fuel tank
Tension of the drive belt is adjustable. Loosen the four nuts on
the bolts which secure the motor to the base plate, Adjust the set
screws which bear against the motor crankcase to achieve the
required belt tension .Ensure that the four nuts and the set screw
Introduction
Thank you for your
Earth works
Landscaping
Driveway toppings
.
locknuts are tightened after adjustment.

ACCESSORIES

Transportation Trolley; Protective Frame; Rubber Mat etc.

HAZARDS AND RISKS

NEVER allow any person to operate the machine without
adequate instruction.
ENSURE all operators read, understand and follow the operating
instructions;
SERIOUS INJURY could result from improper or careless use of
this machine;
Plates compactors are heavy units and should be positioned by
two people of appropriate strength. Using
The lifting handles provided on the machine, along with correct
lifting techniques.
！MECHANICAL HAZARDS
D
O NOT operate the machine unless all protective guards are in
place.
KEEP handles and feet clear of rotating and moving parts as they
will cause injury if contacted.
ENSURE that the motor operation switch is in the OFF position
and the spark plug ignition lead is disconnected before removing
the guards or making adjustments.
ENSURE both the machine and the operator are stable by setting
up on level terrain and the machine will not tip over, slide of fall
while in operation or unattended.
DO NOT leave the machine in operation while it is unattended.
ENSURE that the walls of a trench are stable and will not
collapse due to the action of the vibration, prior to commencing
compaction.
EUSURE that the area to be compacted does not contain any
-live‖ electrical cables, gas, water or communication services
which many be damaged by the action of vibration.
EXERCISE CARE when operating unit. Exposure to vibration or
repetitive work actions may be harmful to hands and arms.
NEVER stand on the unit while it is operating.
DO NOT increase the governed no-load motor speed above
3,500 r/min. Any increase may result in personal injury and
damage to the machine.
BE CAREFUL not to come in contact with the muffler when the
engine is hot, since it can cause severe burns.
ENSURE that the repairs to the motor and machine are carried
out by COMPETENT personnel.
！FIRE & EXPLOSION HAZARDS
PETROL is extremely flammable and explosive under certain
conditions;
2