Activate Phoenix Buggy User Manual page 8

SEAT UNIT TILT ADJUSTMENT
Hold the backrest firmly.
Squeeze the two handles together to disengage the
tilt lock and reset to the desired angle. Check that
the pins have located into the new setting before
releasing the backrest.
FOOTREST HEIGHT ADJUSTMENT
Loosen the bolts that secure the footrest to the footrest
hanger, and set to the desired height.
Re-tighten the bolts to secure this position.
To attach the footrest, the pop-pin must be pulled out
as the footrest hanger is placed into the bracket under
the seat. The pop-pin will click into positon to secure
the footrest
REMEMBER: When making adjustments, do not remove nut completely. Just loosen off
about one full turn. Tighten each nut in turn when adjustment is complete.
4
SEAT DEPTH ADJUSTMENT
To adjust the seat depth, the bolts that attach the
seat base plate to the seat brackets should be
loosened as shown – there are four altogether.
The seat depth should then be reset and the bolts all
re-tightened.