Fitting The Footmuff - Activate Phoenix Buggy User Manual

FITTING THE HOOD
The hood is attached as shown, with the hood
connectors fitted into the hood brackets on
the sides of the backrest.
To release, press in the triangular catch and
slide the hood forward.
TO LOAD INTO A CARBOOT
Remove the footrest. Remove the seat from the chassis. The seat will now sit firmly on the
two tubes underneath. Fold and load the chassis separately.
8

FITTING THE FOOTMUFF

The Footmuff is attached to the hood as shown.
There is an alternative position to pin the footmuff,
about 100ml above the seat level.
7