Activate Phoenix Buggy User Manual page 10

ATTACHING THE HEADREST
The Headrest is attached by Velcro straps
around the backrest. This can be set at various
FITTING THE HARNESSES
The shoulder straps are passed through the appropriate
reinforced position in the backrest. The straps feed through the
backrest and are secured within the enclosed panel on the back
of the backrest. The webbing should be passed through the cam
buckle and the cam buckle closed firmly on it in the correct
position for the occupant. The lower straps are attached to the
seat bracket using the triglide provided.
supplied with appropriate instructions.
The seat is then rotated backwards so that the back bar fits into the channel at the rear of
the seat carriage.
The Pop-Pin then secures the seat in position.
The seat can be fitted either forward facing or rearward facing, whichever suits the child
and attendant.
heights.
Harnesses will be
REMOVING AND ATTACHING THE SEAT
To attach the seat the front bar of the seat unit is
positioned into the front channel.