Samsung SCZ-2273 User Manual page 33

DIS The DIS mode can compensate for
vibration of the camera
I

When DIS is operating, D-ZOOM does not operate.
SYNC Two synchronization modes are
available INTERNAL and EXTERNAL
LINE-LOCK. In LINE-LOCK mode, it
synchronizes the camera's video out
signal to the external SYNC signal.
- INT : Internal synchronization
- LL : External line-lock synchronization
If you choose 'LL', you can adjust
the desired phase. Press the SET button.
You can adjust the desired phase from 0 to 359.
COMM ADJ (Communication Adjustment)
This function sets up the camera communication status when controlling the camera
through an external controlled device.
➊
When the SPECIAL menu screen is
displayed, using the UP or DOWN
button so that the arrow indicates
'COMM ADJ'.
➋
Set up the mode moving the 4
direction of the SET button.
- Protocol : Select the communication
- CAM ID : Determines the camera's identifi cation number (between 0 and 255).
- BAUD RATE : You can select 2400/4800/9600/19200/38400/57600/115200 bps.
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
PROTOCOL. (SAMSUNG-T,
SAMSUNG-E, Pelco-P, Pelco-D, Vicon, Panasonic, Bosch, Honeywell,
AD.)
SPECIAL SETUP
PRIVACY
DAY/NIGHT AUTO
DIS
SYNC
SPECIAL SETUP
PRIVACY
DAY/NIGHT AUTO
DIS
SYNC
COMMUNICATION SETUP
PROTOCOL
SAMSUNG-T
CAM ID
BAUD RATE
UART MODE
RET PKT
DISABLE
COAX
RETURN
English_33
OFF
OFF
INT
OFF
OFF
INT
1
9600
8-N-1
ON