LevelOne NetCon FBR-1415TX User Manual page 52

Example:
Configuration on NAT Router
Destination
192.168.1.0
192.168.0.0
So if, for example, the client3 wanted to send an IP data gram to 192.168.0.2, it would use the above
table to determine that it had to go via 192.168.123.103 (a gateway),
And if it sends Packets to 192.168.1.11 will go via 192.168.123.216
Each rule can be enabled or disabled individually.
After routing table setting is configured, click the save button.
SubnetMask Gateway
255.255.255.0 192.168.123.216
255.255.255.0 192.168.123.103
52
Hop Enabled
ˇ
1
ˇ
1