Auto Ch Memory; Skipping Stored Channel; Clear All; Display The Channel Information - Sharp LC-26DV27UT Operation Manual

Watching TV
3 Press EXIT to return to the normal screen.
Setting MTS/SAP stereo mode
When the TV receives a analog signal, the analog
information will appear.
The TV/DVD has a feature that allows reception of
sound other than the main audio for the program.
This feature is called Multi-channel Television Sound
(MTS). The TV/DVD with MTS can receive mono
sound, stereo sound and Secondary Audio Programs
(SAP). The SAP feature allows a TV/DVD station to
broadcast other information, which could be audio in
another language or something completely different
like weather information.
• Channel label (if preset)
• Signal type
• Audio information (Stereo, SAP or Mono)
• Resolution
• Channel number
• V-Chip rating
• Sleep timer
• Picture size
Display the channel information
Press DISPLAY to display the current channel (or
input source) information on the screen.
When the TV receives a digital signal, the digital information
will appear for a few seconds.
• Channel number • Station name
• Channel label (if preset) • Broadcast program name
• V-Chip rating • Signal type
• Sleep timer • Audio language
• Program guide • Picture size
• Resolution
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
~
• MTS only operates while in TV mode.
• MTS is available only when receiving analog broadcasting,
not when receiving digital broadcasting.
• When the TV receives a stereo or SAP broadcast, the
word "Stereo" or "SAP" displays on-screen if you press
DISPLAY.
Changing MTS
You can change MTS as shown below to match the
television broadcast signal.
1 In analog TV mode, press AUDIO and the "Audio"
menu screen displays. "MTS" will be highlighted.
2 Press AUDIO again or
<t4/~
to select "Stereo",
"SAP" or "Mono".
Auto Ch Memory
Clear All
Auto Ch Memory makes the TV/DVD look for all
channels viewable in the set area.
1
Press TV MENU and the MENU screen displays.
2
Press
J;./"
to select "Channel", then press
~
or ENTER.
Press J;./" to select "Auto Ch Memory", then press
~
or
ENTER.
3
Press
J;./"
to select "Signal Type", then press
<4/~
to
select "Cable" or "Air".
4
Press
J;./.,
to select "Automatic Search", then press
ENTER.
S
The TV will begin memorizing all the channels available
in your area.
• It may take from 15 minutes to 30 minutes to complete
memorizing digital cable channels.
Depending on the reception condition, a BAR display
may not advance for several minutes, please be
patient.
~
• Memorizing channels is best accomplished during evening
"PRIMETIME" hours, as more stations are broadcasting
digital signals. Memorizing channels can only be
accomplished while a station is broadcasting a digital
signal to set that channel into memory.
• New digital channels may be added to your area
periodically, it is recommended to perform the "Automatic
Search" procedure regularly.
All channels are deleted from the channel memory.
1
Press TV MENU and the MENU screen displays.
2
Press J;./" to select "Channel", then press
~
or ENTER.
3
Press J;./., to select "Add/Delete", then press
~
or
ENTER.
4
Press
J;./.,
to select "Clear All", then press
~
or ENTER.
S
Press EXIT to return to the normal screen.
Skipping stored channel
You can set channel selection disabled using CH
A/V.
1
Press TV MENU and the MENU screen displays.
2
Press J;./., to select "Channel", then press
~
or ENTER.
3
Press
J;./"
to select "Add/Delete", then press
~
or
ENTER.
4
Press J;./., to select "Add/Delete", then press
~
or
ENTER.
S
Press
J;./"
to select the channel that you want to skip.
6
Press
<4/~
to select "Delete" for selected channel.
7
Press EXIT to return to the normal screen.
RmD
• To add a digital channel you are watching:
Select a channel you want to add. Then select "Adding
Channel" in step 4, press
~
or ENTER.
• To release the skipping channel:
Select "Add" in step 6.
@-17